**** BEGIN LOGGING AT Mon Oct 06 03:00:00 2014 Oct 06 04:52:40 blogic r42782 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c * ar71xx: fix reset button gpio for OM2P/OM2P-HS Oct 06 04:52:45 blogic r42783 trunk/package/base-files/files/sbin/sysupgrade * sysupgrade: preserve symlinks in backups Oct 06 04:52:50 blogic r42784 trunk/tools/firmware-utils/src/mkporayfw.c * firmware-utils: add NEXX factory image support Oct 06 04:52:56 blogic r42785 trunk/target/linux/ (8 files in 7 dirs) * ramips: Support for RAMIPS based Tripmate HT-TM02 board Oct 06 04:53:03 blogic r42786 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds * ar71xx: add LED defaults for the EnGenius ESR1750 Oct 06 04:53:10 blogic r42787 trunk/package/network/services/hostapd/files/netifd.sh * hostapd: read missing parameter for dynamic VLANs Oct 06 04:53:15 blogic r42788 trunk/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch * ralink: Add missing code to free GPIO on Ralink SoC Oct 06 04:53:26 blogic r42789 trunk/target/linux/ ramips/base-files/etc/board.d/01_leds ramips/dts/DIR-810L.dts * ramips: D-Link DIR-810L: make led naming consistent with other boards Oct 06 04:53:35 blogic r42790 trunk/package/kernel/linux/modules/leds.mk * kernel: add ledtrig-transient module support Oct 06 04:53:41 blogic r42791 trunk/package/kernel/linux/modules/other.mk * kernel: add rtc-ds1307 module support Oct 06 04:53:48 blogic r42792 trunk/target/linux/ar71xx/image/Makefile * ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8) Oct 06 04:53:58 blogic r42793 trunk/package/network/utils/iwinfo/src/hardware.txt Oct 06 04:53:58 iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs Oct 06 04:54:04 blogic r42794 trunk/include/toplevel.mk * Fix build when TAR_OPTIONS env variable is set Oct 06 04:54:09 blogic r42795 trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh * ar71xx: simplify TP-LINK model detection Oct 06 04:54:16 blogic r42796 trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh * ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection Oct 06 04:54:23 blogic r42797 trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh * ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7 Oct 06 05:19:42 blogic r42798 trunk/target/linux/lantiq/base-files/sbin/dsl_notify.sh * lantiq: led name has changed from adsl -> dsl Oct 06 05:31:25 cyrus r42799 trunk/package/libs/libnftnl/Makefile * libnftnl: bump to 2014-10-02 Oct 06 05:56:25 blogic r42800 trunk/package/base-files/files/lib/functions.sh * base-files: make postinst script run inside a subshell Oct 06 06:12:26 blogic r42801 branches/barrier_breaker/target/linux/ramips/patches-3.10/0035-USB-dwc2.patch * ralink: add dwc2 reset patch Oct 06 06:13:53 build #96 of ar71xx.mikrotik is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/96 Oct 06 06:25:42 cyrus r42802 trunk/package/network/ (6 files in 2 dirs) * nftables: bump to 2014-09-30, disable gmp Oct 06 09:29:30 tat: during the BB rc stage, all the feeds got split into subdirs. Oct 06 09:39:32 hi Oct 06 09:39:52 I have a rather large (~1MB uncompressed) patch to send Oct 06 09:40:08 the doc says that I should put in on a server Oct 06 09:40:15 is there any preference? Oct 06 09:41:42 like a pastebin is fine, or do you prefer having the patch file itself hosted somewhere? Oct 06 09:42:10 mripard: having it hosted somewhere would be better Oct 06 09:42:21 mripard: how large is it if you .gz it? Oct 06 09:44:04 jow_laptop: let me take a look Oct 06 09:45:37 hey mripard Oct 06 09:45:46 jow_laptop: 253K Oct 06 09:45:51 wigyori: hi :) Oct 06 09:45:57 :) Oct 06 09:46:36 mripard: hm, still a bit huge for the ml Oct 06 09:48:19 mripard: whats the patch about? Oct 06 09:49:24 cyrusff: adding 3.16 support Oct 06 09:49:38 i see Oct 06 09:50:05 jow_laptop: yeah :/ Oct 06 09:50:22 jow_laptop: any way, hosting it is not an issue, I just wanted to get your best pratices :) Oct 06 09:52:31 mripard: just curious, generic only, or does this include sunxi backports as well? Oct 06 09:57:11 wigyori: it's not about sunxi, it's for work Oct 06 09:57:23 mvebu actually Oct 06 09:58:01 mripard: I'd say post the cover letter to the ml and point to the hosting of the patch series Oct 06 09:58:46 jow_laptop: ack, will do Oct 06 09:58:48 thanks Oct 06 10:06:32 build #708 of ppc44x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/708 Oct 06 10:36:30 mripard: gotcha, thx Oct 06 11:20:23 cyrus r42803 trunk/package/network/ ipv6/odhcp6c/files/dhcpv6.sh ipv6/odhcp6c/files/dhcpv6.script ipv6/odhcp6c/Makefile * odhcp6c: add route-workaround for broken IPv6-ISPs Oct 06 11:53:01 build #754 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/754 Oct 06 12:03:37 build #208 of cns21xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/208 Oct 06 12:06:23 build #677 of sibyte is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/677 Oct 06 13:05:17 build #689 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/689 Oct 06 13:50:00 rmilecki r42804 trunk/target/linux/generic/patches-3.14/ 405-mtd-add-more-helper-functions.patch 402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch * kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT Oct 06 14:02:56 rmilecki r42805 trunk/target/linux/generic/config-3.14 * kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT Oct 06 15:08:44 rmilecki r42806 trunk/target/linux/generic/patches-3.14/ 400-mtd-add-rootfs-split-support.patch 405-mtd-add-more-helper-functions.patch 401-mtd-add-support-for-different-partition-parser-types.patch 402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch * kernel: add some warnings to the old (built-in) rootfs splitter Oct 06 15:19:26 openwrt/trunk/build_dir/target-mips_34kc_uClibc-0.9.33.2/netifd-2014-10-02/main.c:14:19: fatal error: stdio.h: No such file or directory Oct 06 15:19:35 something wrong? Oct 06 15:25:37 nunojpg: it seems that you did some update recently Oct 06 15:25:48 which affected the toolchain Oct 06 15:26:02 try doing `make distclean` Oct 06 15:26:09 sorry Oct 06 15:26:13 make dirclean Oct 06 15:26:26 and also rm -rf build_dir stagin_dir Oct 06 15:26:38 you have torebuild the toolchain tought :/ Oct 06 16:20:19 matteo: thanks. I didn't believe this stdio.h missing error could be caused by a toolchain change Oct 06 19:10:54 build #611 of iop32x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/611 Oct 06 20:06:04 blogic r42807 trunk/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch * ralink: various i2c fixes Oct 06 20:06:20 blogic r42808 trunk/target/linux/octeon/config-3.14 * octeon: fix serial console for 3.14 kernel Oct 06 20:06:30 blogic r42809 trunk/target/linux/octeon/image/Makefile * octeon: prepare elf kernel image and md5sum for usb copying Oct 06 20:06:46 blogic r42810 trunk/target/linux/octeon/profiles/000-Generic.mk * octeon: remove kmod-ath9k from default packages Oct 06 20:06:57 blogic r42811 trunk/target/linux/ octeon/patches-3.14/0010-MIPS-octeon-Add-interface-mode-detection-for-Octeon-.patch octeon/patches-3.14/0011-MIPS-Octeon-Add-twsi-interrupt-initialization-for-OC.patch * octeon: add patches which are not upstreamed yet Oct 06 20:07:06 blogic r42812 trunk/package/system/fstools/Makefile * fstools: update to latest git Oct 06 20:07:19 blogic r42813 trunk/package/system/ubox/Makefile * ubox: update to latest git head Oct 06 20:07:31 blogic r42814 trunk/package/system/procd/Makefile * procd: update to latest git HEAD Oct 06 20:07:41 blogic r42815 trunk/target/linux/lantiq/patches-3.14/0150-lantiq-pinctrl-xway.patch * lantiq: fix some alt function on pinctrl-xway Oct 06 20:07:54 blogic r42816 trunk/target/linux/lantiq/dts/VGV7519.dtsi Oct 06 20:07:55 lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up) Oct 06 20:08:09 blogic r42817 trunk/target/linux/lantiq/dts/VGV7519.dtsi Oct 06 20:08:09 lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling Oct 06 20:08:23 blogic r42818 trunk/target/linux/lantiq/dts/VGV7519.dtsi Oct 06 20:08:23 lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board Oct 06 20:08:35 blogic r42819 trunk/target/linux/lantiq/dts/VGV7519.dtsi * lantiq - vgv7519: remove exin definition copied from dev-board dts Oct 06 20:08:46 blogic r42820 trunk/target/linux/lantiq/dts/VGV7519.dtsi * lantiq - vgv7519: add pci-rst entry into dts Oct 06 20:08:54 blogic r42821 trunk/target/linux/lantiq/dts/VGV7519.dtsi * lantiq - vgv7519: fix open-drain configuration for stp Oct 06 20:09:01 blogic r42822 trunk/target/linux/lantiq/dts/VGV7519.dtsi Oct 06 20:09:01 lantiq - vgv7519: remove spi_cs4, since the board use this line for something else Oct 06 20:09:09 blogic r42823 trunk/target/linux/lantiq/ xrx200/config-3.14 dts/VGV7519.dtsi * lantiq - vgv7519: enable pci bus Oct 06 20:09:20 blogic r42824 trunk/target/linux/lantiq/ dts/VGV7519BRN.dts dts/VGV7519NOR.dts dts/VGV7519.dtsi base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom * lantiq - vgv7519: load rt5362 eeprom from bootloader param patition Oct 06 20:09:30 blogic r42825 trunk/target/linux/ at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c at91/patches-3.10/700-tqma9263-support.patch at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c at91/patches-3.14/700-tqma9263-support.patch * at91: remove support for TQMa9263 Oct 06 20:25:23 build #202 of brcm2708 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/brcm2708/builds/202 Oct 06 20:28:21 blogic r42826 trunk/package/system/procd/Makefile * procd: r42814 added a bad git version Oct 06 20:47:13 build #780 of at91 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/780 Oct 06 21:34:07 rmilecki r42827 trunk/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch * bcm53xx: add Netgear R6300 V2 LEDs and buttons Oct 06 21:54:35 build #196 of adm8668 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/196 Oct 06 22:23:23 build #189 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/189 Oct 07 02:22:02 build #95 of lantiq.xrx200 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq.xrx200/builds/95 Oct 07 02:54:26 build #662 of ar71xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/662 **** ENDING LOGGING AT Tue Oct 07 03:00:00 2014