**** BEGIN LOGGING AT Fri Oct 10 02:59:59 2014 Oct 10 04:46:22 build #744 of ramips is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/744 Oct 10 05:11:25 build #712 of ppc44x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/712 Oct 10 05:32:07 build #198 of adm8668 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/198 Oct 10 06:26:53 good morning Oct 10 06:28:28 I'm working on MT7620A based router, tried to flash file "openwrt-ramips-mt7620a-uImage.bin" using serial console, but now I see the message " Oct 10 06:28:28 ## Booting image at bc020000 ... Oct 10 06:28:28    Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover " Oct 10 06:29:38 any hints, ideas what I can do? maybe there is a way to get uncompressed kernel image? Oct 10 06:30:01 or maybe there are few different lzma compression types? Oct 10 06:37:41 anyone? Oct 10 07:58:32 people? I just need fresh idea Oct 10 08:04:52 anybody alive? :) Oct 10 08:13:27 are there any manuals for creating target/linux/ramips/dts/ files? Oct 10 08:18:59 hello? Oct 10 08:39:43 nuclon: it should be documented at http://www.devicetree.org/Device_Tree_Usage Oct 10 08:41:01 great. thank you. and any ideas, why I can't load and run the kernel image? Oct 10 08:44:21 build #681 of sibyte is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/681 Oct 10 08:44:24 no sorry - maybe sth wrong with u-boot environment that loads the kernel or its the kernel image itself - adding debug messages to that early boot might work but I dont know where to start Oct 10 08:49:37 uboot is undamaged Oct 10 08:50:22 okay, another question - how to find out memory map? I mean - I know that content of flash is at 0xbc000000 for this router. and how to find out RAM area? Oct 10 08:50:39 (maybe I simply load the kernel image to wrong area?) Oct 10 08:57:00 nuclon: dunno - are they stored in the uboot-env variables ? "printenv" command Oct 10 08:57:27 blogic r42866 trunk/package/network/ (5 files in 2 dirs) * comgt: add ncm proto support Oct 10 08:57:37 blogic r42867 trunk/target/linux/ (8 files in 7 dirs) * ramips: add support for Nexx WT1520 Oct 10 08:57:49 blogic r42868 trunk/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch * ralink: various i2c related fixes Oct 10 09:04:33 plntyk: http://pastebin.com/NajJ0Tus Oct 10 09:16:33 well that does not look helpful Oct 10 09:34:44 plntyk: very true. I would really like to have at least kernel loaded and run Oct 10 09:35:01 but I can't understand the error "Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover " Oct 10 09:35:18 what does it mean? lzma is not supported? corrupted file? Oct 10 09:43:43 build #693 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/693 Oct 10 09:45:50 nuclon: well you could check the source code where that print out gets generated Oct 10 09:57:40 build #758 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/758 Oct 10 09:58:03 you could check for mt7620 programming guide too but probably that won't show you any immediate solution since its highly technical Oct 10 14:27:55 build #783 of at91 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/783 Oct 10 14:30:40 build #614 of iop32x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/614 Oct 10 21:11:49 build #191 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/191 **** ENDING LOGGING AT Sat Oct 11 03:00:00 2014