**** BEGIN LOGGING AT Wed Mar 11 02:59:58 2015 Mar 11 03:37:18 build #899 of orion is complete: Failure [failed compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/899 Mar 11 06:27:53 build #352 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/352 Mar 11 08:50:59 hi, I'm wondering to know if there is l2tp configuration support through netifd, is there? Mar 11 08:57:48 grep -ri l2tp over netifd project is empty... so I'd assume there is not Mar 11 08:59:48 ifdm_: there is for l2tpv2 Mar 11 08:59:52 see packages feed Mar 11 09:01:42 cyrusff: I was looking for l2tpv3 support with the new l2tpeth ifaces Mar 11 09:02:09 don't think there is Mar 11 09:02:17 but feel free to submit patches :P Mar 11 09:02:51 :) thanks Mar 11 09:03:26 I'll consider it Mar 11 09:05:09 i think there were some changes in luci regarding l2tpv3 - ip-full should support this (the old l2tpv3 package is obsoleted afaik) Mar 11 10:27:20 If I have several services from a framework, that are in the same feed, but in different packages Mar 11 10:27:34 how may I add configuration options for each one? Mar 11 10:27:49 I was thinking on using the same /etc/config/alljoyn file Mar 11 10:27:59 (btw, integrating alljoyn) Mar 11 10:28:14 but the problem is that there are several scripts that manage the software itself... Mar 11 10:45:24 is ucitrack deprecated or obsolete? Mar 11 10:57:53 txomon|fon: it is deprecated Mar 11 11:00:55 can 5 and 10Mhz channel width be used on ath9k Mar 11 11:00:56 ? Mar 11 11:02:23 nbd, ok, thanks Mar 11 11:22:01 nighty-_: afaik the driver should support it Mar 11 12:00:00 plntyk, uhmmm Mar 11 12:20:29 kaloz r44652 trunk/target/linux/ ppc44x/patches-3.18/100-openwrt_flashmap.patch ppc44x/patches-3.18/110-openwrt_dts_cmdline.patch ppc44x/config-3.18 ppc44x/image/Makefile * ppc44x: use the mtdsplit framework for the Taishan Mar 11 12:57:46 http://wiki.openwrt.org/doc/techref/preinit_mount step 5 should be replaced with procd now right? Mar 11 14:04:17 nbd: should we be talking here? Mar 11 14:05:01 doesn't really matter Mar 11 14:05:08 k Mar 11 14:05:25 I wondered if I should have folded the nl80211.h sync into the new release Mar 11 14:05:33 but I wanted to keep things atomic Mar 11 14:05:35 also changed the name of the kernel patch regarding that EXPORT_SYMBOL line Mar 11 14:05:56 * bforbes nods Mar 11 14:06:55 there's a patch on the backports list to include an exported function that doesn't do anything, so when that lands, we'll have to revert it in the generated compat-wireless since we're patching the kernel ourselves Mar 11 14:07:35 right Mar 11 14:07:54 this whole exercise has been a bunch of hopping between #openwrt, #kernel-backports, and #linux-wireless to figure out how to update the mac80211 package Mar 11 14:08:42 we should probably document the process ;) Mar 11 14:11:38 nbd: do you think you can respond on the list to my concern about the patch to revert the cryptoapi ports? Mar 11 14:19:02 whkcn Mar 11 14:19:04 which list? Mar 11 14:20:19 openwrt-devel Mar 11 14:21:22 I emailed the list yesterday about my changes and a new branch with an update to wireless-testing master-2015-03-09 Mar 11 14:22:31 i think we can reduce that patch a bit Mar 11 14:31:01 i'll make a smaller debloat patch when i find the time for it Mar 11 14:31:12 nbd: cool Mar 11 14:32:26 build #900 of cobalt is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/900 Mar 11 14:58:13 ath9k seems to work Mar 11 14:58:42 yep Mar 11 14:59:10 I'm running this on an Archer C7 v2 and it has both ath10k and ath9k radios Mar 11 15:01:29 nbd: and both work great Mar 11 15:02:45 nbd r44653 trunk/target/linux/generic/patches-3.18/030-nl80211-Allow-set-network-namespace-by-fd.patch * kernel: backport an export required by newer compat-wireless versions Mar 11 15:02:56 nbd r44654 trunk/package/network/ utils/iw/patches/010-dynack.patch utils/iw/patches/001-nl80211_h_sync.patch utils/iw/patches/200-reduce_size.patch utils/iw/Makefile * iw: update to 3.17 Mar 11 15:03:10 nbd r44655 trunk/package/kernel/ (116 files in 3 dirs) * mac80211: update to wireless-testing 2015-03-09 Mar 11 15:03:15 * bforbes watches as his work gets pushed to trunk Mar 11 15:03:17 nbd r44656 trunk/package/kernel/mac80211/Makefile * mac80211: Use newer firmware for ath10k Mar 11 15:10:56 nbd: don't forget iwinfo and hostapd... Mar 11 15:54:56 blogic r44657 trunk/package/ (6 files in 5 dirs) * json-c: update to 0.12 and bump all depending services Mar 11 15:55:15 blogic r44658 trunk/target/linux/generic/patches-3.18/490-mtd-ubi-add-EOF-marker-support.patch * Fix 3.18.8 breakage of UBI devices with EOF marker (e.g. WNDR4300) Mar 11 15:55:31 blogic r44659 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds * ar71xx: fix switched WLAN LEDs on TP-LINK Archer C5/C7 Mar 11 15:55:40 blogic r44660 trunk/target/linux/ramips/dts/FIREWRT.dts * ralink: add FireWRT IO multiplexing Mar 11 15:55:54 blogic r44661 trunk/target/linux/ramips/image/Makefile * ralink: FireWRT flash size is up to 16M. Mar 11 15:56:20 blogic r44662 trunk/target/linux/ ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch ar71xx/patches-3.14/404-mtd-wrt160nl-trx-parser.patch ar71xx/patches-3.14/405-mtd-tp-link-partition-parser.patch ar71xx/patches-3.18/404-mtd-wrt160nl-trx-parser.patch * ar71xx: fix WRT160NL and TP-Link partition parser patches Mar 11 15:56:38 blogic r44663 trunk/target/linux/ (11 files in 5 dirs) * ar71xx: rename wrt160nl's trx partition parser Mar 11 15:56:49 blogic r44664 trunk/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c * ar71xx: generalize cybertan partition parser Mar 11 15:57:05 blogic r44665 trunk/target/linux/ ar71xx/files/arch/mips/ath79/mach-mynet-rext.c ar71xx/image/Makefile * ar71xx: improve WD's My Net Wi-fi Range Extender image creation Mar 11 15:57:15 blogic r44666 trunk/package/system/rpcd/Makefile * rpcd: update to latest git HEAD Mar 11 16:01:48 blogic r44667 packages/ (11 files in 5 dirs) * clean packages already moved to github Mar 11 16:22:24 blogic r44668 trunk/target/linux/ cobalt/config-default cobalt/config-3.14 * cobalt: rename config file Mar 11 16:24:28 bforbes: nbd: nice work Mar 11 16:25:32 nbd r44669 trunk/package/kernel/mac80211/patches/ 081-backport-devm_kmemdup.patch 082-backport-list_last_entry.patch * mac80211: remove obsolete patches Mar 11 16:26:23 zajec: thanks... it's been a lot of trial and error, but it's pretty cool to see work landing in a project like OpenWRT Mar 11 16:36:58 nbd r44670 trunk/package/kernel/mac80211/patches/020-add_mpls_h.patch * mac80211: add missing header file Mar 11 16:42:21 blogic r44671 trunk/package/network/ utils/ipset/Makefile utils/ipset/patches * ipset: Bump to 6.24 Mar 11 17:00:39 build #85 of ipq806x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ipq806x/builds/85 Mar 11 17:07:34 jdub: dumb question... why can't you get systemd to compile with uclibc? Mar 11 17:08:26 blogic r44672 trunk/target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch * lantiq: Add usb initialization bits from ltq-hcd to platform init Mar 11 17:08:31 blogic r44673 trunk/target/linux/lantiq/patches-3.18/0040-USB-DWC2-enable-usb-power-gpio.patch * lantiq: Configure gpio power output pin when initializing dwc2 usb Mar 11 17:08:38 blogic r44674 trunk/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch * lantiq: Add sensible hw-defaults for dwc2 Mar 11 17:08:49 blogic r44675 trunk/target/linux/lantiq/patches-3.18/0042-USB-DWC2-big-endian-support.patch * lantiq: Use platform endianness when accessing dwc2 registers Mar 11 17:08:54 blogic r44676 trunk/target/linux/ lantiq/dts/TDW8970.dts lantiq/dts/P2812HNUFX.dtsi lantiq/dts/vr9.dtsi * lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2 Mar 11 17:09:03 blogic r44677 trunk/target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch * lantiq: make the new dwc2 support only work for vr9 Mar 11 17:09:11 blogic r44678 trunk/target/linux/ (10 files in 2 dirs) * kenrel: refresh patches Mar 11 17:10:42 rmilecki r44679 trunk/target/linux/bcm53xx/files/drivers/misc/bcm47xx-sprom.c * bcm53xx: fix typo in bcm47xx sprom driver Mar 11 17:12:25 nbd: # insmod cfg80211.ko Mar 11 17:12:27 [ 189.130000] cfg80211: Unknown symbol get_net_ns_by_fd (err 0) Mar 11 17:13:01 brcm47xx Mar 11 17:14:01 zajec: make sure you recompile the kernel as well Mar 11 17:14:13 there's a new patch to export that symbol Mar 11 17:14:26 at least for the 3.18 kernel Mar 11 17:14:44 i did Mar 11 17:14:54 brcm47xx is 3.14 Mar 11 17:14:57 maybe that's the problem? Mar 11 17:15:07 yeah, that'll need a patch as well Mar 11 17:15:11 did you decide to kill 3.14? ;) Mar 11 17:15:31 I deny killing anything ;) Mar 11 17:16:02 zajec: it looks like we'll need something like this in 3.14 Mar 11 17:16:04 https://dev.openwrt.org/browser/trunk/target/linux/generic/patches-3.18/030-nl80211-Allow-set-network-namespace-by-fd.patch?rev=44653 Mar 11 17:22:25 greetings Mar 11 17:22:45 I'm Janne from Helsinki, Finland Mar 11 17:22:50 haven't been here before Mar 11 17:23:20 I have a patch to submit and thought of asking if there's any quick do's and don'ts Mar 11 17:24:33 jberg: https://dev.openwrt.org/wiki/SubmittingPatches Mar 11 17:25:01 jberg: this may help as well https://github.com/openwrt/packages/blob/master/CONTRIBUTING.md Mar 11 17:25:12 if the patches are going to be large, it's also acceptable to send an [RFC] email with a link to a git repo Mar 11 17:26:37 bforbes: thank you Mar 11 17:26:48 it's a really simple patch, only a few lines affected Mar 11 17:27:04 fixes this: https://dev.openwrt.org/ticket/15282 Mar 11 17:27:16 bforbes: care you send a patch? Mar 11 17:27:24 I can Mar 11 17:27:44 just reading up on the formalities of commit comment format etc Mar 11 17:28:24 the fix suggested on the above issue will cause the RESET button to do a FACTORY RESET by simply pressing it Mar 11 17:28:38 I'm gonna write this down in a comment and attach the patch Mar 11 17:29:14 the reason that happens is that the button high/low state is incorrect as a result of the suggested fix and the RESET button will be virtually down-pressed the entire time Mar 11 17:29:56 once physically pressed, release is triggered and since the button "was pressed" down for long before release => factory reset Mar 11 17:30:30 I have verified this by compiling, flashing and testing both before my patch and after Mar 11 17:30:35 jberg: it looks like you created the patch with git? if so, you can send the patch with `git send-email` and it'll format it correctly Mar 11 17:30:46 you'll need to subscribe to the openwrt-devel list first Mar 11 17:30:54 oh, ok, cool Mar 11 17:31:15 this was exactly the kind of info I came here for / hoping to get :) Mar 11 17:31:30 git yes Mar 11 17:31:39 though have never used git send-email Mar 11 17:32:12 is there a way for me to get the patch attached to the ticket automatically through git send-email? Mar 11 17:32:25 rmilecki r44680 trunk/target/linux/ bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch * bcm53xx: fixup early device id 8012 Mar 11 17:32:52 nbd r44681 trunk/target/linux/generic/patches-3.14/030-nl80211-Allow-set-network-namespace-by-fd.patch * kernel: backport symbol export from r44653 to 3.14 Mar 11 17:32:55 zajec: ^ Mar 11 17:33:02 nbd: tx Mar 11 17:33:05 thx Mar 11 17:34:20 jberg: patchwork.ozlabs.org/project/openwrt/list/ Mar 11 17:34:55 ah wait no Mar 11 17:34:58 ticket Mar 11 17:35:03 ignore what I said ;) Mar 11 17:35:34 so there's a ticket for the issue I'm talking about but the solution suggested on the ticket will introduce a worse problem Mar 11 17:36:24 so I have a patch Mar 11 17:37:08 should I a) attach it to the already-existing ticket, b) send it with git send-email, c) both, d) something else? :) Mar 11 17:37:39 (I'm sorry I didn't RTFM :) Mar 11 17:38:09 b) Mar 11 17:38:37 reference the ticket number in the commit log Mar 11 17:38:39 ok Mar 11 17:40:30 nbd: is there something wrong with my iwinfo and hostapd patches? since NL80211_ATTR_WIPHY_ANTENNA_GAIN moved in nl80211_commands, those will need updated if they want to set antenna gain Mar 11 17:45:12 nbd: works, thanks Mar 11 17:45:15 [ 13.150000] b43-phy0: Broadcom 4360 WLAN found (core revision 42) Mar 11 17:45:17 [ 13.170000] b43-phy1: Broadcom 4331 WLAN found (core revision 29) Mar 11 17:45:46 KangiMonster: ok, so I have to register to patchwork.ozlabs.org/project/openwrt/list/, not to dev.openwrt.org, correct? Mar 11 17:46:34 jberg: if you provide a patch to the openwrt-devel mailing list, the patch will show up at patchwork.ozlabs.org Mar 11 17:46:42 jberg: use "tab" for auto completion of nicknames ;) Mar 11 17:46:47 jberg: send a patch to openwrt-devel Mar 11 17:46:50 jberg: that's it Mar 11 17:46:57 jberg: patchwork picks patches automatically Mar 11 17:47:03 it's just a helper tool for developers Mar 11 17:48:34 zajec: ooooh, didn't know Irssi autocompletes nicks :D :D Mar 11 17:48:49 zajec: thanks Mar 11 17:48:55 (feeling n00b) Mar 11 17:59:08 zajec: Have you escalate the missing 43602 firmware to a kernel ticket ? the drivers are supposed to be avail since 3.17-ish but the firmware for all pcie is missing from linux-firmware Mar 11 17:59:10 blogic r44682 trunk/package/network/services/uhttpd/Makefile * uhttp: update to latest git HEAD Mar 11 17:59:16 blogic r44683 trunk/package/kernel/linux/modules/usb.mk * modules: make dwc2 only depend on gadget support for brcm2708 Mar 11 18:01:31 plntyk: i sent an e-mail to Broadcom Mar 11 18:01:37 I got a reply Mar 11 18:01:44 not sure if it went to ML too or not Mar 11 18:01:49 that they're working on it Mar 11 18:03:17 ah k - seems it didnt went to the ML Mar 11 18:03:41 was wondering since http://marc.info/?l=linux-wireless&m=142412382429813 is almost 1 month old Mar 11 18:03:48 i forgot to Cc you Mar 11 18:04:10 just wanted to give you that link :) Mar 11 18:04:42 (+the 4? months they missed - having a driver without firmware does not make sense Mar 11 18:05:01 ... Mar 11 18:05:05 that's Broadcom ;') Mar 11 18:05:06 ;) Mar 11 18:05:22 well Mar 11 18:05:25 look at https://chromium.googlesource.com/chromiumos/third_party/linux-firmware/+/f151f016b4fe656399f199e28cabf8d658bcb52b Mar 11 18:06:02 ? Mar 11 18:06:04 what about it? Mar 11 18:06:42 pcie firmware for 1 card that is not in official linux-firmware repo and looking at the commit its from around the mainline driver push Mar 11 18:06:53 for 4356pcie Mar 11 18:07:48 there are plenty of such firmwares Mar 11 18:08:22 https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 Mar 11 18:08:26 "Alternatively, when not available the Android version can be used as well:" Mar 11 18:08:30 "git clone https://android.googlesource.com/platform/hardware/broadcom/wlan" Mar 11 18:08:57 they didn't manage to release fw_bcm4329.bin Mar 11 18:09:04 but it's public anyway... Mar 11 18:09:06 Broadcom's logic ;) Mar 11 18:09:50 all you open source guys work together anyway, right? ;) Mar 11 18:14:30 working together sometimes mean keeping track what other ppl are doing ^^ Mar 11 18:15:12 I just meant that I'm guessing Broadcomm thinks releasing to one open source project == giving it to all projects without notifying them Mar 11 18:24:35 bforbes, zajec, KanjiMonster: ok, I emailed the patch now to openwrt-devel@lists.openwrt.org using git send-email; hopefully did it correctly in terms of formalities :) Mar 11 18:30:42 bforbes: didn't hit the list Mar 11 18:31:55 zajec: you mean jberg Mar 11 18:32:06 right, sorry Mar 11 18:32:40 ok, used gmail smtp so spam status shouldn't be a problem (also received Cc myself) Mar 11 18:33:06 i checked spam just in case Mar 11 18:39:23 not there? Mar 11 18:39:25 jberg: are you subscribed to the ML? Mar 11 18:39:46 no, that's probably the reason Mar 11 18:40:27 openwrt-devel doesn't ... ah, yeah, you need to be. You can then just disable mail delivery if you don't want to be "fully" subscribed Mar 11 18:40:47 ok Mar 11 18:41:03 I looked at the list's mailman page and based on "Using openwrt-devel Mar 11 18:41:03 To post a message to all the list members, send email to openwrt-devel@lists.openwrt.org. Mar 11 18:41:09 You can subscribe to the list, or change your existing subscription, in the sections below." Mar 11 18:41:30 thought I could send without subscribing Mar 11 18:41:37 but ok :) Mar 11 18:41:40 will send again Mar 11 18:41:47 once someone approves me Mar 11 18:42:13 not needed Mar 11 18:42:24 you just confirm by clicking some link from e-mail Mar 11 18:42:35 aa, ok Mar 11 18:42:41 just a sec Mar 11 18:42:55 jberg: if you got e-mail about message waiting for approval, it was probably your patch :) Mar 11 18:44:47 found them, gmail placed them confusingly under "Offers" and didn't look in there Mar 11 18:48:14 build #831 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/831 Mar 11 18:49:22 zajec: ok, now it reached the list Mar 11 20:32:45 uhm, sorry to bug you guys but i think there were some json-c changes lately that caused cshark fail to compile - http://codepad.org/OUbA875R Mar 11 20:34:01 someone just posted the same problem - https://dev.openwrt.org/ticket/19147 Mar 11 20:35:01 cshark was using the deprecated include, that was removed in json-c 0.12 finally. Mar 11 20:36:05 looks like 0.12 landed in trunk today :) Mar 11 20:38:15 woop Mar 11 20:38:53 man, not sure if mhei's patch actually helps, or just masks the problem Mar 11 20:39:11 letting people find the pkgconfig for the old name won't help anyone who is using old style header includes. Mar 11 20:39:22 it just means it fails at compile instead of at configure time Mar 11 23:11:00 build #85 of ramips.mt7621 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/85 Mar 12 00:40:12 mirko r44684 trunk/tools/automake/patches/200-do-not-override-silent-rules.patch * Do not use $(V) - force AM_V=1 Mar 12 00:40:13 mirko r44685 trunk/tools/automake/Makefile * disable silent-rules by default Mar 12 01:27:23 build #315 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/315 **** ENDING LOGGING AT Thu Mar 12 02:59:58 2015