**** BEGIN LOGGING AT Mon Jun 29 02:59:58 2015 Jun 29 04:43:26 arch/mips/built-in.o: In function `epg5000_get_mac': Jun 29 04:43:26 /home/openwrt/src/openwrt/build_dir/target-mips_34kc_musl-1.1.10/linux-ar71xx_mikrotik/linux-3.18.16/arch/mips/ath79/mach-epg5000.c:128: undefined reference to `ath79_nvram_parse_mac_addr' Jun 29 04:43:30 Makefile:923: recipe for target 'vmlinux' failed Jun 29 04:43:33 make[5]: *** [vmlinux] Error 1 Jun 29 04:43:37 (building for mikrotik) Jun 29 04:58:25 reverting 46047-46049 fixes it Jun 29 05:00:20 stintel: would be interesting if 4.9/5.1 is booting on octeon - the "broken" commit for Arm of 4.9 was unspecific Jun 29 05:01:02 especially considering that Linaro seems to be including several ARM fixes Jun 29 06:09:43 build #44 of mpc83xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/44 Jun 29 06:13:09 build #44 of ep93xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/44 Jun 29 06:47:38 cyrus r46135 trunk/package/network/config/netifd/Makefile * netifd: add mtu6 option to override IPv6 MTU Jun 29 06:47:46 cyrus r46136 trunk/package/libs/elfutils/ (6 files in 2 dirs) * elfutils: bump to 0.163 Jun 29 06:47:59 cyrus r46137 trunk/toolchain/binutils/Makefile * toolchain: binutils: enhance build reproducability Jun 29 06:48:16 cyrus r46138 trunk/rules.mk * toolchain: only use fortify-headers for musl Jun 29 06:48:26 rmilecki r46139 trunk/target/linux/ (5 files) * bcm53xx: use UART serial DT patch sent upstream Jun 29 06:48:55 rmilecki r46140 trunk/target/linux/ bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch * bcm53xx: rework patch enabling UART support Jun 29 06:52:37 build #44 of brcm47xx.mips74k is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.mips74k/builds/44 Jun 29 06:59:59 rmilecki r46141 trunk/target/linux/ (5 files) * bcm53xx: port last 2 UART patches to 4.1 Jun 29 07:33:33 build #44 of mpc52xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/44 Jun 29 08:03:58 ahoy Jun 29 08:05:13 Is it possible that there are issues with current kernels and balongV7 based Huawei USB sticks in combination with ncm? Jun 29 08:05:55 I've been trying hard to get it to work and find numerous web refs in a couple of bugtrackers about huawei and ncm sticks suddenly not working anymore but no real solution Jun 29 08:08:07 when I use wvdial and do "analog" dial-up with pppd it works. But as soon as I try to do it with ncm it doesn't anymore. the wwan0 device is up but doesn't get an IP via dhcp. I can send at^dhcp and query seemingly valid ip & gw from there but when I apply them to wwan0 there is still no traffic going Jun 29 08:08:12 any ideas? Jun 29 08:09:38 stick is a telekom speedstick LTE V (Huawei 3372) with latest huawei FW Jun 29 08:24:17 blogic r46142 branches/ chaos_calmer/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c chaos_calmer/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch chaos_calmer/target/linux/ar71xx/config-3.18 * Revert "ar71xx: add kernel support for EnGenius EPG5000." Jun 29 08:24:24 blogic r46143 branches/chaos_calmer/target/linux/ar71xx/base-files/ etc/diag.sh lib/upgrade/platform.sh etc/uci-defaults/02_network lib/ar71xx.sh * Revert "ar71xx: add user-space support for EnGenius EPG5000." Jun 29 08:24:27 blogic r46144 branches/ chaos_calmer/target/linux/ar71xx/generic/profiles/engenius.mk chaos_calmer/target/linux/ar71xx/image/Makefile * Revert "ar71xx: add profile and build image for EnGenius EPG5000." Jun 29 08:34:47 build #44 of octeon is complete: Failure [failed compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/44 Jun 29 09:32:16 Is anyone here involved with the lua binding of iwinfo? The scanlist method of the iwinfo lua binding hangs when the wifi stack is restarted. Jun 29 09:32:38 (I’ve also mailed the mailinglist and posted on the forum) https://forum.openwrt.org/viewtopic.php?pid=281473 Jun 29 10:47:44 build #45 of brcm47xx.legacy is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.legacy/builds/45 Jun 29 11:35:37 plntyk: 4.9 boots fine on octeon Jun 29 11:35:52 plntyk: but still has the segfault with libpcap Jun 29 11:57:40 so no one tested CC with a huawei 3372 with NCM yet? Jun 29 12:07:46 chron0: testing *all* possible hardware is difficult - you could test with BB and then CC/current trunk and then state which version is not working/which does Jun 29 12:21:56 https://dev.openwrt.org/ticket/15328 Jun 29 12:22:10 same issues, current master branch Jun 29 12:22:51 telekom speedstick lte v (rebranced huawei E3372) with original huawei FW (and already test a number of alternative FW's) Jun 29 12:22:56 plntyk: ^ Jun 29 12:23:40 BB doesn't have cdc-ncm module for huawei IIRC Jun 29 12:25:17 https://forum.openwrt.org/viewtopic.php?pid=211007#p211007 Jun 29 12:25:48 this kinda works, at least in theory, since IP/GW/DNS are actually assigned to interface/system Jun 29 12:26:00 however no traffic is going through I cannot even ping the GW Jun 29 12:41:53 I'm willing to compile/test and invest time into it but need at least some guidance since I have no clue whether I'm doing it wrong or if this is a kernel/system/FW issue Jun 29 12:57:29 jow_laptop, nbd: is there a good reason that the kvm_guest target for x86 is compiled -march 486? Jun 29 14:13:03 cyrus r46145 trunk/package/libs/libubox/Makefile * libubox: fix MD5 for musl on big-endian platforms Jun 29 16:06:20 KanjiMonster: I finally got a chance to do a new build and my erratic port problems on mikrotik rb493g have gone away, thanks! Jun 29 16:44:49 cyrus r46146 trunk/config/Config-build.in * hardening: disable user-space SSP for !musl Jun 29 16:51:58 build #44 of ar71xx.mikrotik is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/44 Jun 29 17:11:34 build #44 of adm5120 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/44 Jun 29 20:06:54 build #46 of cns21xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/46 Jun 29 20:07:09 build #45 of avr32 is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/45 Jun 29 20:07:38 build #46 of ppc40x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/46 Jun 29 20:07:43 build #46 of orion is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/46 Jun 29 20:08:16 build #46 of cobalt is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/46 Jun 29 20:08:17 build #46 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/46 Jun 29 20:54:13 luci2 doesn't build with glibc: http://pastebin.com/PVd80j11 Jun 29 21:28:20 I could fix it in similar way as blogic fixed odhcpd: http://stewie.be.tintel.eu/openwrt/0001-luci2-properly-handle-return-codes.patch but it looks dirty to me Jun 29 21:28:52 jow_laptop: you think that would be acceptable to fix luci2 build with glibc? ^ Jun 29 21:43:54 great, octeon with glibc doesn't have the libpcap segfault \o/ Jun 29 22:20:20 hauke r46147 trunk/target/linux/generic/config-4.1 * kernel: add some missing config options for 4.1 **** ENDING LOGGING AT Tue Jun 30 02:59:58 2015