**** BEGIN LOGGING AT Fri Oct 30 02:59:59 2015 Oct 30 03:13:28 build #127 of ipq806x is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/ipq806x/builds/127 Oct 30 03:15:52 build #129 of lantiq is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/129 Oct 30 06:38:52 build #128 of cobalt is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/128 Oct 30 06:40:21 build #128 of cns21xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/128 Oct 30 06:41:13 build #128 of orion is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/128 Oct 30 07:22:44 build #126 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/126 Oct 30 08:40:21 fyi, built image for my ERL's with GCC 5.2, Glibc 2.21 and binutils 2.25. it runs fine, just a high load / slowness during jffs2_build_filesystem Oct 30 08:40:42 but at least libpcap doesn't segfault so my router isn't almost useless Oct 30 08:53:06 jffs2_build_filesystem takes ~9 minutes: [ 578.815057] jffs2: notice: (1643) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Oct 30 08:53:27 after that the load settles and everything seems fine Oct 30 12:57:24 rmilecki r47281 trunk/target/linux/ bcm53xx/patches-4.3/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch bcm53xx/patches-4.1/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch bcm53xx/base-files/etc/board.d/02_network * bcm53xx: add workaround for Netgear R8000 network Oct 30 14:15:14 karlp: seems like I was following the only non valid doc page http://wiki.openwrt.org/doc/howto/easy.build Oct 30 14:15:24 I would erase the full page Oct 30 14:24:28 yeah, agreed, just burn that entire thing Oct 30 14:45:54 rmilecki r47282 trunk/target/linux/ bcm53xx/patches-4.1/132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch bcm53xx/patches-4.3/132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch bcm53xx/patches-4.3/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch bcm53xx/patches-4.1/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch * bc Oct 30 14:45:55 OpenWrtm53xx: add missing Netgear R8000 LEDs Oct 30 15:14:11 I've edited it to nothing, and removed all the links to it, none of them were very relevant, but I don't have permissions to delete the page entirely. Oct 30 15:17:06 done Oct 30 15:17:52 <__trine> the only good thing on that page was the reference to an SVN CO Oct 30 15:19:20 nbd r47283 trunk/target/linux/ generic/config-4.1 generic/config-3.18 generic/config-4.3 generic/config-4.0 * kernel: add missing config symbol Oct 30 15:19:27 nbd r47284 trunk/target/linux/ generic/patches-4.1/023-bcma-from-4.4.patch generic/patches-3.18/029-bcma-from-4.4.patch generic/patches-4.3/020-bcma-from-4.4.patch * kernel: backport some bcma header file definitions from wireless-testing Oct 30 15:19:32 nbd r47285 trunk/package/network/services/relayd/Makefile * relayd: update to the latest version, fixes some issues found by Coverity Oct 30 15:19:42 nbd r47286 trunk/package/kernel/ (79 files in 4 dirs) * mac80211: update to wireless-testing 2015-10-26 Oct 30 15:19:54 nbd r47287 trunk/package/kernel/mac80211/patches/ (16 files) * mac80211: add pending ath9k/ath10k patches Oct 30 15:20:03 nbd r47288 trunk/package/ (12 files in 2 dirs) * busybox: update to version 1.24.1 Oct 30 15:20:09 nbd r47289 trunk/package/utils/busybox/patches/102-trylink_mktemp_fix.patch * busybox: fix non-portable invocation of mktemp Oct 30 15:21:58 nbd r47290 trunk/ rules.mk scripts/strip-kmod.sh include/kernel-defaults.mk * build: Allow kernel modules to set build ID debug symbol Oct 30 15:22:27 nbd r47291 trunk/package/network/utils/iproute2/Makefile * iproute2: fix compile with uClibc-ng Oct 30 15:34:41 nbd r47292 trunk/package/network/services/samba36/files/samba.init * samba: convert init script to procd, add reload support Oct 30 16:18:14 <__trine> This is an interesting situation ,, if I connect my comfast wifi device to a local free hotspot I get about 2 megs download speed but if I start inside a vpn from inside it back to my router then I get a 12 meg download speed Oct 30 16:18:54 <__trine> This is an interesting situation ,, if I connect my comfast wifi device to a local free hotspot I get about 2 megs download speed but if I start a vpn from inside it back to my router then I get a 12 meg download speed Oct 30 16:19:10 what port you running your vpn on? Oct 30 16:19:17 <__trine> 1195 Oct 30 16:19:59 that is interesting Oct 30 16:21:43 udp? Oct 30 16:23:26 <__trine> yes Oct 30 16:24:19 wonder if the hotspot is bandwidth shaping tcp and not udp? Oct 30 16:26:03 or filtering software that skips the vpn traffic Oct 30 16:26:39 <__trine> the ping time is also improved slightly Oct 30 16:27:57 iperf Oct 30 16:28:31 <__trine> the up speed does not seem to be affected either way Oct 30 16:34:40 I was at a location once where I had to run openvpn on port 53 because only udp port 53 was open Oct 30 16:39:40 <__trine> is KanjiMonster on his holidays he is conspicuous by his absence Oct 30 16:40:20 nah, just busy with other stuff Oct 30 16:41:07 <__trine> ah ah he's here :) Oct 30 16:41:30 <__trine> see i miss you :) Oct 30 16:42:15 <__trine> even if you are a grumpy old tart at times :) Oct 30 17:26:24 build #126 of ppc40x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/126 Oct 30 17:35:36 Goodevening/morning gents. Can someone please shed some light on this error: http://pastebin.com/N6dX0ZsY Oct 30 17:35:51 fresh git clone of CC Oct 30 17:36:22 error can be found in line #6 Oct 30 20:26:09 build #128 of ipq806x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ipq806x/builds/128 Oct 30 21:11:10 build #109 of adm8668 is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/109 Oct 30 21:39:19 build #109 of ar71xx.mikrotik is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/109 Oct 30 21:39:47 build #129 of ramips.mt7621 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/129 Oct 30 21:43:00 build #116 of avr32 is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/116 Oct 30 22:02:53 nbd r47293 trunk/package/firmware/linux-firmware/Makefile * linux-firmware: minor makefile cleanup Oct 30 22:03:04 nbd r47294 trunk/package/ kernel/mac80211/Makefile firmware/ath10k-firmware firmware/ath10k-firmware/Makefile * ath10k: split out ath10k firmware into a separate source package and .ipk Oct 30 22:03:08 nbd r47295 trunk/package/firmware/ath10k-firmware/Makefile * ath10k-firmware: add qca99x0 firmware Oct 30 22:03:14 nbd r47296 trunk/include/image.mk * build: make mkfs-* depend on kernel installation to fix parallel build issues Oct 30 22:32:51 nbd r47297 trunk/package/kernel/mac80211/files/regdb.txt * mac80211: update regulatory database to master-2015-10-22 Oct 30 22:32:55 nbd r47298 trunk/tools/xz/Makefile * tools/xz: update to 5.2.2 Oct 30 22:33:08 nbd r47299 trunk/tools/ quilt/patches/000-relocatable.patch quilt/Makefile quilt/patches/001-fix_compile.patch * tools/quilt: update to 0.64 Oct 30 22:33:15 nbd r47300 trunk/tools/pkg-config/ patches Makefile * tools/pkg-config: update to 0.29 Oct 30 22:33:38 nbd r47301 trunk/target/linux/realview/Makefile * realview: Create ext4 image by default Oct 30 22:33:53 nbd r47302 trunk/target/linux/generic/config-4.3 * kernel: add some missing symbols for 4.3 Oct 30 22:33:58 nbd r47303 trunk/target/linux/x86/generic/config-default * x86/generic: refresh subtarget kernel config Oct 30 22:34:07 nbd r47304 trunk/target/linux/x86/generic/config-default * x86/generic: enable pata_atiixp driver Oct 30 22:34:28 nbd r47305 trunk/target/linux/x86/generic/config-default * x86/generic: enable radeon drm driver Oct 30 22:34:37 nbd r47306 trunk/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c * ramips: fix for kernel 4.0 napi repoll need return budgets number Oct 30 23:11:09 build #117 of mxs is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/mxs/builds/117 Oct 31 00:36:29 build #129 of brcm63xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/129 Oct 31 02:51:38 build #130 of lantiq is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/130 Oct 31 02:55:11 build #105 of mpc52xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/105 **** ENDING LOGGING AT Sat Oct 31 02:59:59 2015