**** BEGIN LOGGING AT Sat Feb 27 02:59:58 2016 Feb 27 11:37:05 dangole: are you oxnas guy? Feb 27 11:41:00 * russell-- just flashed r48800 openwrt-oxnas-pogoplug-v3-squashfs-ubinized.bin on a pogoplug v3 and managed to hose it Feb 27 11:41:35 [ 0.754040] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 Feb 27 11:41:38 [ 0.766720] Please append a correct "root=" boot option; here are the available partitions: Feb 27 11:41:41 [ 0.775075] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Feb 27 11:54:36 russell--: ok, that's weird. can you send the whole bootlog to me via pm? Feb 27 11:59:49 dangole: yeah, hang on Feb 27 12:06:54 russell--: can it be that you defined a root= parameter in bootargs handed down to the kernel from u-boot? because if the rootfs is squashfs, kernel should try mounting /dev/ubiblock* automatically and something like 'root=ubi0:rootfs'. maybe a left over from old builds before auto-detecting rootfs on UBI was introduced (ie. pre-2014)? Feb 27 12:07:10 dangole: http://pastebin.com/9cuL0aFg Feb 27 12:07:53 oh, well, that's odd. no nand :( Feb 27 12:08:22 [ 0.645291] nand: No NAND device found Feb 27 12:08:28 that's defintely a bug Feb 27 12:08:43 r47531 worked (that was the last one i'd built) Feb 27 12:09:15 my notes say, with a patch from you (circa November 2015) Feb 27 12:10:49 i think i started with the reasonably vanilla config i used from the r47531 build Feb 27 12:22:59 dangole: this was the diffconfig: http://pastebin.com/7uLkwUpS Feb 27 12:28:32 * russell-- hits hay, zzzzz's Feb 27 12:31:07 russell--: looks like the nand driver was broken with the update to kernel 4.4 Feb 27 12:42:46 When I have "CONFIGURE_ARGS=--target=$(GNU_TARGET_NAME)", I see this recipe gets passed to configure in the root directory, but not the configure in sub-directory. I believe the reason is the configure in sub-directory is called within the Makefile.am in the root directory. So, I tried to add "--target=$(GNU_TARGET_NAME)" in the Makefile.am file in the root directory and the configure in sud-directory does not pick it up. So, Feb 27 12:42:46 how do I pass the "--target=$(GNU_TARGET_NAME)" to the Makefile.am in the root directory to pass the "--target=$(GNU_TARGET_NAME)" when calling the configure in sub-directory? Feb 27 15:21:52 nbd: hello, just wanted to ask if you are planning to also add rfkill support to mt76. Is it even possible? Feb 27 15:22:29 i don't have any plans to add that Feb 27 15:22:44 because i don't have any device that i could test it on or where it would be useful Feb 27 15:27:26 nbd: i saw there are half-sized mPCIe dual-band modules for laptops featuring MT7612EN chips for less than $10 now... Feb 27 15:31:15 dangole: where? i saw them for $16 Feb 27 15:31:42 here https://www.indiegogo.com/projects/geek-force-the-1st-android-and-linux-router-board#/ Feb 27 15:32:11 was interested in buying, but shipping costs additional $31 :) Feb 27 15:37:14 kab-el: on alibaba Feb 27 15:38:36 $16 for a single unit is not bad either... but $31 for sending a bubble-wrap pocket via mail is quite a lot... Feb 27 15:39:31 hmm, but on alibaba there is min order of 100 pieces Feb 27 15:45:25 if anyone is interested in mt7620 design material just ask Feb 27 15:46:07 http://pastebin.com/QKC1n6sT Feb 27 16:18:22 lorenzo: MediaTek_ApSoC_SDK_4320_20150414.tar.bz2 Feb 27 16:18:30 lorenzo: does this containt source of raeth driver? Feb 27 16:33:06 kab-el: yeah Feb 27 16:34:44 #define RAETHER_DRIVER_NAME "raether" Feb 27 16:35:37 kab-el: http://pastebin.com/gid6sCcm **** BEGIN LOGGING AT Sat Feb 27 21:36:26 2016 Feb 28 02:42:57 serial speed problem with soekris net4826, grub gets stuck until i switch baud rate to 38400. bios wants 19200. **** ENDING LOGGING AT Sun Feb 28 02:59:59 2016