**** BEGIN LOGGING AT Sun Jun 03 03:00:01 2018 Jun 03 03:29:03 hmmmm Jun 03 03:29:51 if I override the MTU on a LAN interface, the ethernet ports get their MTUs changed but not the bridge or wlan interfaces Jun 03 05:59:27 Hi, I'm using a community build firmware on my tplink router and i was checking my bandwidh monitor and saw that my router mac is also listed in it and it shows about 36kb of upload and 67 connections in total. Is this normal? Jun 03 06:05:48 you realize that this question is basically impossible to answer with the information you provided? but there are plenty of configurations that might cause that, and be it just ddns, ntpd, etc. pp. Jun 03 07:19:49 maybe Jun 03 08:39:08 hi i want to setup a wireguard client on an wr841n v9. i can't build the firmware with luci because the is probably to big. so i build it without but can't find docu on how to config its without the webinterface Jun 03 12:43:05 blogic: hi, what's the state of qca8k_trunk in your tree? Is it functional so I can try it out? Jun 03 12:49:01 ldir: ping Jun 03 13:16:49 how is openwrt doing as far as reproducible-builds goes? Jun 03 14:03:11 huaracheguarache: pong Jun 03 14:11:25 ldir: hi. If I my memory serves me right you had issues with DMARC on the email list, right? Jun 03 14:12:31 Sort of - because of dmarc policy on my domain the email list has to wrap my email. Jun 03 14:12:52 ldir: do you still experience it? Jun 03 14:12:59 unfortunately patchwork picks up the wrappers address instead of mine. Jun 03 14:13:28 yes because after fiddling with turning dmarc validation off for my domain I decided that I'd quite like it turned on. Jun 03 14:14:16 ldir: ok. I have that issue too, but there's no way to turn it off on protonmail as far as I'm aware. Jun 03 14:15:38 it's a bit of a pain 'cos I can't maintain my own patches in patchwork....ie. for when I send in v2,3,4,5 etc I can't mark the others superceded. Jun 03 14:19:50 maybe I should use gmail instead for the mailing list Jun 03 14:20:06 ldir, just use githib prs onstead Jun 03 14:20:19 i cant eben send to the list thanks to spamhaus Jun 03 14:20:48 isnt email wonderful. Jun 03 14:20:56 indeed that is an option. Jun 03 14:21:04 everyone can have a server, except not really Jun 03 14:21:09 karlp: got blacklisted? Jun 03 14:21:27 of course Jun 03 14:21:45 can un listed for a week or two, but fuck em. never lasts Jun 03 14:21:54 they blacklist again? Jun 03 14:22:00 and of course, no info. Jun 03 14:22:03 email is wonderful but spammers need.....to be educated. Jun 03 14:22:19 * ldir is being exceptionally polite. Jun 03 14:22:52 karlp: maybe your mail server is betraying you somehow. have you tried something like the mxtoolbox domain checker to see if everything's good? Jun 03 14:23:33 salcedo, nahhhh, never entered my mind.... why would i do such a thing? Jun 03 14:24:21 karlp: https://mxtoolbox.com/ Jun 03 14:40:52 anyone know on what basis luci works out the IPv4 Upstream box data..... and why it is now empty on my AP...which used to show the address given it on the lan by the main router Jun 03 16:43:40 ldir: nevermind me, i checked your usb quirks patch modifications against mine and mine were found lacking (and breaking things all over the place) Jun 03 16:44:47 * ldir falls off chair ... something he did right :-) Jun 03 16:46:00 Didn't get around to looking at your stuff, sorry. Been working a half night/day shift for the past 2 days, got about 6 hours sleep in total over past 48 hours. Jun 03 16:46:39 going slightly mental - next step hallucinations I reckon. Jun 03 16:47:16 no worries man. Jun 03 16:47:33 i have been enjoying the weekend for two evenings in a row :) Jun 03 16:48:01 yesterday was kinda hangover-ish during the day, better now. helps if you don't drink too much eh Jun 03 16:48:56 all I can tell you is that at 01:15 there have been some fabulous starry skies whilst driving in to work. Jun 03 16:52:04 hehehe Jun 03 16:57:25 bbl, router needs to flash a new build now :^) Jun 03 17:52:31 good evening Jun 03 17:54:03 hi Jun 03 17:54:38 I'm looking to replace my tl-wdr4300/archer c7 with more powerful hardware, not necessarily including wireless. I'm looking at APU.2C2, which looks nice. Any recommendations on similar boards I should check out in a similar price/performance bracket? Jun 03 17:55:05 main purpose would be routing, with QoS/sched_cake Jun 03 17:55:27 someone will answer you I hope soon :-) Jun 03 17:55:39 I have all the time in the world Jun 03 17:56:04 ldir: luci picks the info from the (first) interface having a default route (target 0.0.0.0, mask 0) Jun 03 17:56:14 Sagi: apu is pretty highly recommended here Jun 03 17:56:34 it looks really nice, with coreboot and all. Jun 03 17:58:14 jow: thank you Sir! Jun 03 17:58:26 is anyone virtualising openwrt, e.g. as a kvm guest? Jun 03 17:58:45 that'd be my alternative, just removing the dedicated network hardware. Jun 03 17:59:04 I like luci, that's why I'd still use openwrt. Jun 03 18:02:49 Hi, I have a weird problem (to me at least): I have a recently installed a router running LEDE-17.01.4 as DSL gateway. And since then my wireguard tunnels have stopped working. During troubleshooting I found out that the router sends the wireguard packets (UDP) out on the WAN interface (pppoe-wan) without masquerading, meaning the packets have the lan address (192.168.2.0/24) of the sending device as Jun 03 18:02:51 source instead of my public IP. The router itself does not have wireguard installed and the wg traffic comes from other devices in the LAN. Other UDP traffic like DNS seems to get NAT'ed without issue. What could be the cause of linux doing "selective" nat'ting? Jun 03 18:03:56 I haven't really changed the firewall config from the default settings. Jun 03 18:36:42 Now I'm trying to set up iptables tracing by installing iptables-mod-trace, but that depends on kmod-ipt-debug, which is not in the package list. /o\ Jun 03 18:38:57 lichtfeind: have you solved your problem yet? Jun 03 18:39:21 if not, i've got info for you. Jun 03 18:44:46 updated openwrt/upstream, https://sdwalker.github.io/uscan/index.html Jun 03 18:52:12 lichtfeind: https://pastebin.com/qvpfjEgu Jun 03 18:55:41 rot13_: does the problem of unnatted packets persist after "echo f > /proc/net/nf_conntrack" ? That should flush the contnrack table Jun 03 18:58:12 jow: That fixes it! Do you know why that helps/How I can make the fix permanent? I've rebooted the router several times and have always gotten the same problem again. Jun 03 18:58:16 thx! Jun 03 18:59:25 well this indicates that the wireguardtraffic stream is started before the firewall nat rules are set up Jun 03 18:59:38 is this wireguard on the lede router itself? Jun 03 19:00:21 hmm, that could very well be. I have keepalive packets enabled on the tunnels (every 24s). Jun 03 19:00:33 No wireguard on the router itself. Jun 03 19:00:47 so its a wg device "behind" lede? Jun 03 19:01:22 yes, one is on a raspi for example. Jun 03 19:01:39 anyhow, you can likely get away with adding "echo f > /proc/net/nf_conntrack" to /etc/rc.local Jun 03 19:03:19 Alright, I can live with that. :) Hopefully I don't forget the next time I'm upgrading/resetting the thing. Jun 03 19:41:01 is it possible to run olsrd over a wireguard interface? Jun 03 20:17:07 ping jow Jun 03 20:22:54 jow I have a q about luci. To make looking at the Status page better for screen readers could you add some heading labels pleas. Jun 03 20:25:10 eg for Memory, Network, DHCP Leases, DHCPv6 Leases, Wireless and Associated Stations Jun 03 20:26:29 They shoed up to my screen reader as tables befor but they don't now. Jun 03 20:27:27 does somehow here run latest cake and can confirm that the nat keyword doesnt work? Jun 03 20:27:34 someone Jun 03 20:47:53 wow, gitlab's way slower than github Jun 03 20:49:25 self-hosted gitlab is as fast as you want it to be. Jun 03 20:50:13 this instance must be hosted on potatoes then Jun 03 20:50:30 only took 3 minutes to fork Jun 03 20:52:52 definitely Jun 03 20:56:49 oh that's a nice touch Jun 03 20:57:12 when pushing changes, remote gives you a link to create a pull request in CLI Jun 03 20:58:37 hi I wonder if the huawei B2268H LTE modem's firmware can be changed to openwrt Jun 03 20:59:13 hi I wonder if the huawei B2268H LTE modem's firmware can be changed to openwrt Jun 04 00:49:56 Is there any chance that I could find a volunteer to port LEDE onto the Zoneflex 7962? These APs have amazing range thanks to a proprietary antenna array that implements a hardware feature called Beamflex+. They cost $995 when they were new, but they can be purchased for like $30 off eBay now. Jun 04 00:50:48 s/LEDE/OpenWRT/ Jun 04 00:50:50 Someone on reddit got upset with me for suggesting them because they are EOL and then said that someone should get something that could run OpenWRT. This should have no trouble running OpenWRT if someone ported it. Jun 04 00:51:45 It is listed here: https://openwrt.org/toh/ruckus/zf7962 Jun 04 00:56:19 ryao: porting this without having the hardware will be a tedious task. and it looks really crappy from todays perspective, only 320mhz and possibly little ram/flash Jun 04 00:57:19 rotanid: Its wi-fi performs beautifully. Range is amazing. I'd be happy to pay to send one to someone. Jun 04 00:57:56 I'd just need an address and then I could place an order with eBay. Jun 04 00:58:06 that it performs good with stock doesnt mean it would work as well with OpenWrt Jun 04 00:58:20 rotanid: It is a hardware feature. I am curious if it still works with OpenWRT. Jun 04 01:01:33 rotanid: Anyway, if anyone is willing to volunteer, I am willing to buy the hardware and ship it. It would be nice to have OpenWRT on these things. They are dirt cheap and their antenna characteristics are awesome. Jun 04 01:18:23 after 500 continues reboot zbt1326 stands solid so far, a good sign, need figure out a way to stress wifi and wired net performance and heat up the cpu **** ENDING LOGGING AT Mon Jun 04 03:00:00 2018