**** BEGIN LOGGING AT Fri Oct 12 03:00:00 2018 Oct 12 03:48:11 russell--: ping Oct 12 04:24:43 mangix: pong Oct 12 05:11:40 russell--: https://github.com/openwrt/packages/pull/7172 Oct 12 08:59:14 Hello, I'm having problem installing packages on 18.06.1 and trunk on Buffalo WZR-HP-G300NH, it seems related to cfi-flash/mtd/jffs2/opkg problem. I opened a thread https://forum.openwrt.org/t/impossible-to-install-update-any-packages-on-wzr-hp-g300nh-18-06-1/21666 but I don't know how to troubleshoot it. Could I have an hint ? Oct 12 20:40:59 jow: could you please have a look at my hostapd patches adding sae, owe and wpa3 support Oct 12 21:16:04 Hello Oct 12 21:16:53 Why there is a mt7530 driver in OpenWrt different from the Linux kernel? Oct 12 21:17:46 Ramips arch Oct 12 21:18:30 https://github.com/torvalds/linux/blob/master/drivers/net/dsa/mt7530.h Oct 12 21:18:45 https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mt7530.h Oct 12 21:20:44 vk496zz: probably the first one is DSA based Oct 12 21:20:51 the later one is swconfig based Oct 12 21:21:02 swconfig was developed at OpenWrt project before we got DSA Oct 12 21:23:34 rmilecki: And what is the difference between DSA and swconfig based? Oct 12 21:23:58 vk496zzz: DSA lists every port as separated interface Oct 12 21:24:07 I'm trying to enable gpio led based on link status, but have troubles Oct 12 21:24:10 swconfig references switch as device Oct 12 21:24:24 DSA is upstream, swconfig is downstream Oct 12 21:25:06 And though maybe is related to the driver Oct 12 21:27:01 https://forum.openwrt.org/t/support-for-strong-1200/22768/15?u=vk496 Oct 12 21:29:31 rmilecki: this is why the switch always show me that the link is up? Because the driver is not DSA based? **** ENDING LOGGING AT Sat Oct 13 02:59:59 2018