**** BEGIN LOGGING AT Sat Aug 03 02:59:57 2019 Aug 03 08:45:55 morning Aug 03 09:17:59 blogic: I have tested the mediatek 4.19 bump with the u7623. I needed to make some changes to the DTS for the compilation to be successful (duplicate nodes), but the board does unfortunately not boot :( The boot process hangs right after "Starting kernel ..." Aug 03 09:18:21 I have tried to enable early printk, but there is no output. I will keep digging, but any pointers as to what could be wrong would be greatly appreciated :) Aug 03 10:33:29 I see one issue, there is no config-4.19 for mt7623. I will see what happens if I start out using the 4.14 config, but right now my board does not want to boot at all :) Aug 03 10:45:17 have a good weekend guys, thanks for all!! Aug 03 11:17:51 replacing the 4.19 config with a 4.14 config did not work, as expected. The following message loops over and over: https://pastebin.com/2UE7qpgZ Aug 03 11:18:06 I will try to figure out how to create configs, new process for me Aug 03 12:01:39 Anyone else? WARNING: Makefile 'package/kernel/linux/Makefile' has a dependency on 'kmod-i2c-bcm2835 ', which does not exist Aug 03 12:03:15 kristrev: I have a note from ages back: make kernel_menuconfig CONFIG_TARGET=subtarget Aug 03 12:17:32 ldir: I also saw this Aug 03 12:21:34 ldir: Thanks! I will try that Aug 03 12:50:01 am curious - init scripts lurking in /etc/init.d/. Why do we not create matching STOP aka Knn links for scripts that don't specify a 'STOP' value but do specify a START value. Why not say STOP= 100 - START ? Aug 03 12:52:05 Hauke: ok, good. Not something I'm doing wrong then. Aug 03 16:33:32 in OpenWrt related scripts, is curl prefered over wget? Aug 03 19:48:45 Hauke: your patch for mdadm was excessive. this is simpler: https://patchwork.ozlabs.org/patch/1141413/ Aug 03 20:13:19 mangix: yes, I saw your patch only later Aug 03 20:14:01 but I also send it upstream Aug 03 20:26:13 * ldir takes a break Aug 03 22:21:52 I played a little bit more with openwrt on my switch. I still have the problem that the last thing in the bootlog is "kmodloader: done loading kernel modules from /etc/modules.d/*". So I added some echo lines into /etc/init.d/boot. https://pastebin.com/SxaCGEiq Aug 03 22:22:11 Interestingly only /dev/kmsg works Aug 03 22:22:33 sdtout, stderr and ttyS0/1 are all not working Aug 03 22:23:29 So this is my bootlog now: https://pastebin.com/Q4HBN3Sm Aug 03 22:24:16 any ideas? Aug 04 00:51:43 Ok for some reason only earlycon is working **** BEGIN LOGGING AT Sun Aug 04 01:58:33 2019 **** ENDING LOGGING AT Sun Aug 04 02:59:57 2019