**** BEGIN LOGGING AT Wed Jun 16 02:59:56 2010 Jun 16 07:42:09 morning Jun 16 09:11:24 "ld: cannot find -lgcc_eh" - someone remembers that? Jun 16 09:19:18 NCommander: around? Jun 16 09:19:40 NCommander: May I ask you for recommendations for debconf? I wonder whether it is of any importance which NY airport I land at Jun 16 09:19:58 hrw: It might be the renames which are being done in the gcc packaging Jun 16 09:20:07 hrw: upstream uses e.g. /usr/lib/foobar/4.4.4 and we use /4.4 Jun 16 09:20:16 anyway found issue - rebuilding again Jun 16 12:54:58 ogra: Hi! I think you have been doing some packaging for u-boot for omap4? Do you have some pointers to code or guidelines or advices to share? Jun 16 13:43:05 sebjan, u-boot-omap4 is the package, take a look Jun 16 13:43:36 ogra: ok, thanks Jun 16 13:54:59 hrw: did you need something? why do you CTCP ping me? Jun 16 13:55:18 hrw [~hrw@chello089078170228.chello.pl] requested CTCP TIME from zumbi Jun 16 13:56:09 11:39 [freenode] hrw [~hrw@chello089078170228.chello.pl] requested CTCP VERSION from zumbi Jun 16 13:58:25 zumbi: I requested time just to check timezone Jun 16 14:02:27 hrw: sure, i am at .es (EU timezone, UTC+1) Jun 16 14:02:48 ~curse iconv tests in eglibc Jun 16 14:03:10 in couple weeks i'll be at UTC Jun 16 14:03:44 hrw: FYI, if you build eglibc with debian patches applied, it will fail on gcc-stage2 builds Jun 16 14:04:34 zumbi: how come your here and not in front of your TV? Jun 16 14:04:39 :-) Jun 16 14:05:05 crtX defines __libc_alloca which it should not Jun 16 14:05:06 * ogra_cmpc was about to ask the same :) Jun 16 14:05:30 ukleinek: what are you doing here? these ubuntu people has tricked you too :-) Jun 16 14:05:34 GrueMaster, http://people.canonical.com/~ogra/jasper/ has a new test image Jun 16 14:06:10 well, I am working (in front PC) and we can have small screen with the game :) Jun 16 14:07:57 zumbi: I passed gcc/stage2 Jun 16 14:09:15 hrw: great :) Jun 16 14:11:19 why core i7 are so expensive :( Jun 16 14:15:05 hrw: because they are fast? Jun 16 14:16:26 amitk: ;) Jun 16 14:16:49 amitk: too bad that move from my q6600 -> i7 would be nearly 1k€ Jun 16 14:17:51 hi prpplague Jun 16 14:18:08 hrw: hey bud Jun 16 14:20:40 ogra_cmpc: downloading now. Should be ready by the time my coffee is ready. Jun 16 14:29:18 GrueMaster, resizing works fine on two cards i tested, dont expect it to work after reboot yet (flash-kernel changes are still missing) Jun 16 15:17:15 ogra_cmpc: Is there any documentation online for creating these images? If so, I can manually build them here, as I have a local mirror of the repo. It would also enable me to do some more specialized testing. Jun 16 15:18:02 GrueMaster, you should be able to create the rootfs with livecd-rootfs Jun 16 15:18:09 ok Jun 16 15:18:20 i cana give you a script for the rest once you have it Jun 16 15:20:24 I assume I will need a newer livecd-rootfs than Lucid? Jun 16 15:20:48 latest from maverick Jun 16 15:29:45 ogra_cmpc: ready for your script. Jun 16 15:30:22 you need the u-boot-omap3 and x-loader-omap packages Jun 16 15:30:32 ok Jun 16 15:30:35 unpack them s0omewhere with dpkg -x Jun 16 15:32:13 http://paste.ubuntu.com/450637/ Jun 16 15:32:54 adjust the paths in the script, it takes the path to the .ext3 file as arg Jun 16 15:33:39 you need to run mkimage for the vmlinuz and initrd.img files livecd-rootfs spits out and point the script to the resulting uImage/initrd files Jun 16 15:37:37 ok Jun 16 15:56:16 ogra_cmpc: FYI: Today's image boots the .34 kernel, but only the 2.6.35-2 kernel & modules are on the root partition. Jun 16 15:56:34 gar Jun 16 15:56:44 i didnt re-roll the ext3 Jun 16 15:57:06 GrueMaster, did the resizing work this time for you ? Jun 16 15:58:29 on this particular card, yes. Will check it on other cards. 16G card, took ~15-20 minutes (I wasn't particularly watching). Jun 16 15:59:40 i hope the time gets down a bit if we have a bigger image Jun 16 15:59:51 so the gap gets smaller Jun 16 16:00:16 it takes 6min on my 4G testcard Jun 16 16:04:54 I'll try to do some timing tests this week, using my desktop USB SD card reader as a baseline. I personally think it may be more I?O bound than platform bound. Jun 16 16:05:34 well, essentially the FS should just get expanded and be filled with zeros Jun 16 16:05:44 right. Jun 16 16:05:47 probably the filling takes so much time Jun 16 16:07:24 did you get any probs with the missing modules ? Jun 16 16:07:46 oem-config worked for me (i did only check for that) Jun 16 16:07:59 Only networking (so far). Jun 16 16:08:14 ah, i didnt even test networking Jun 16 16:08:48 OEM config seems to want to install additional packages. I am assuming that is by design? Jun 16 16:09:18 I.e. ubuntu-desktop, ubuntu-netbook, etc. Jun 16 16:10:03 only if you make a selection in the task selector :) Jun 16 16:10:13 just dont make one Jun 16 16:10:36 for netbook the tasksel part will not be there Jun 16 16:10:40 well, duh. I just wanted to verify that the task selector should be coming up. Jun 16 16:10:50 Ok. Jun 16 16:11:32 did you see my note yesterday regarding jasper naming? Jun 16 16:11:43 the console switching is also a bit weird, but that might be caused by plmouth crashing Jun 16 16:15:59 also, jasper log is now reporting this error: Jun 16 16:15:59 ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk0p2 is Jun 16 16:15:59 mounted. Jun 16 16:16:44 hrm, that was supposed to be fixed Jun 16 16:18:45 can you paste the jasper log somewhere ? Jun 16 16:19:09 hard to do w/o network, but I can try. Jun 16 16:19:21 jasper is supposed to have created an mtab file before running resize2fs Jun 16 16:19:50 well, is there any hint that mtab coundnt be created in the log ? Jun 16 16:20:02 It does. Then deletes it before running tune2fs. Maybe move the rm to the bottom? Jun 16 16:20:53 hmm, the message comes from tune2fs ? Jun 16 16:21:34 yeah, indeed, i'll move it to the bottom Jun 16 16:24:42 is there an easy way to transfer text through the serial port? I want to copy/paste the jasper.log for you, but would rather not retype it. Jun 16 16:24:58 nah, all fine Jun 16 16:25:05 forget about the log Jun 16 16:25:13 ok Jun 16 16:25:19 or cp it to the SD if you feel like Jun 16 16:25:36 and then pull it off there before next test Jun 16 16:25:45 Yea, I suppose I could sneaker-net it. Jun 16 16:30:57 ah, that works. Launch sudo getty /dev/ttyS2 Jun 16 16:31:46 It has been a long time (~8 years) since I messed with serial consoles. Jun 16 16:32:50 heh Jun 16 16:37:29 odd; NetworkManager is trying to configure the ethernet (dhclient and so forth) on a zippy2, even though nothing is plugged in (and mii-tool agrees that there's nothing plugged in) Jun 16 16:38:08 broken sysfs entry of the NIC ? Jun 16 16:38:16 where should I look? Jun 16 16:38:30 NM code and sysfs Jun 16 16:39:01 i dont know from the top of my head what it looks for Jun 16 16:41:41 don't see any difference in /sys/.../eth0/* when I unplug it Jun 16 16:42:30 ah well Jun 16 16:42:42 try again under 2.6.35 once that's working I guess :p Jun 16 16:46:18 cwillu_at_work: /sys/.../eth0/link_mode maybe? Jun 16 16:46:23 nope Jun 16 16:46:29 I compared every file in there Jun 16 16:46:32 Or it could come through as a uevent. Jun 16 16:47:39 nope, nothing in udevadm monitor Jun 16 16:54:49 Well, the driver may not be sending udev reports properly. But I believe network manager is using udev. Jun 16 20:16:25 Is there a reccomended install image for the Lange? Jun 16 20:29:25 Martyn: I think it was Jaunty, but I'm not sure. **** ENDING LOGGING AT Thu Jun 17 02:59:56 2010