**** BEGIN LOGGING AT Fri Dec 23 02:59:56 2011 Dec 23 03:50:59 Nice thing about having the CPU in the tablet; the kb dock isn't burning my pants :P Dec 23 04:07:17 heh Dec 23 04:08:22 the cpu doesn't really get that hot Dec 23 04:08:49 on my atom it did, when the ambient temperature is 35+ C Dec 23 04:10:58 arm chips tend to run a little cooler Dec 23 04:11:08 power == heat Dec 23 04:11:24 cpu draws little power Dec 23 04:11:31 and creates little heat Dec 23 04:12:21 under high load it is probably ~±5c of ambient Dec 23 04:12:35 or somewhere around that :p Dec 23 04:16:25 yeah obviously Dec 23 04:16:43 arm CPU does get hot enough to feel on tf tho Dec 23 04:16:56 like when I tell it to halt and it sits on its arse because it can't umount the SD card Dec 23 04:18:56 I swear that is something to do with your sd card, cause I have a µSD in my device always Dec 23 04:20:45 it's stuff hanging off the dock Dec 23 04:21:02 The microsd in the tablet hasn't caused a noticable problem Dec 23 04:21:15 Although I generally don't have it mounted when I halt Dec 23 04:21:19 I tend to have a usb thumb drive too Dec 23 04:21:24 hum Dec 23 04:21:49 in fact when I am testing blob flashes I put the blob on a thumb drive Dec 23 04:21:54 maybe it's something stupid in oneiric like "don't unmount things that were mounted by the user" or "don't unmount things until lightdm stops" which never happens because lightdm is gone Dec 23 04:22:15 there was a lot of that in lucid Dec 23 04:51:48 One issue that really puzzles me is w3m-img isn't displaying inline images on the framebuffer like it did on my eeepc Dec 23 04:52:02 but it *does* work in xterm (on both) Dec 23 04:52:19 I'm thinking there was a workaround hack I had deployed on the eeepc and forgot about Dec 23 04:57:09 Oh sweet, APT::Default-Release actually works in Ubuntu these days Dec 23 04:58:11 So I can dump precise entries in sources.list and cherry-pick them Dec 23 04:59:54 Oh, and fbi *can* draw images on the framebuffer, so clearly it's *possible*, w3m just doesn't think it can do it Dec 23 05:01:51 And apparently when you quit jfbterm you can't get back to another tty... :-/ Dec 23 05:08:30 Time to RTFS of w3m-img Dec 23 05:46:44 lilstevie: adb does work in CM nightly 256 on my nook color. Dec 23 05:47:19 and are you using the same kernel Dec 23 05:47:26 well similar Dec 23 05:47:29 with the changes to config Dec 23 05:47:37 Well yes, with a couple of patches. Dec 23 05:47:58 Using dalingrin's source which should have usb host support I'm informed =/ Dec 23 05:48:29 I know that's rather adb irrelevant, but it's relevant to my being able to interface with the device in general. Dec 23 05:49:09 I just don't have anything that I can use on it though I realized. =/ Dec 23 05:49:22 host is irrelevant, the adb gadget driver is required Dec 23 05:50:53 Well I'd imagine it should have it, as it is compiled with dalingrin's sources. Dec 23 05:50:57 Let me check. Dec 23 05:51:55 maybe my changes via chroot didn't affect properly? Dec 23 05:53:52 lilstevie: still checking... no clue what section the adb gadget is located in :p Dec 23 05:54:09 usb ofc Dec 23 05:54:10 :p Dec 23 05:57:06 :p I know... but I never delved this far deep... Dec 23 05:57:17 I'm assuming USB Gadget should be selected... which it isn't... Dec 23 06:01:50 lilstevie: wow I'm retarded... can't compile a uImage without uBoot tools made -_- Dec 23 17:56:57 join now Dec 23 17:57:24 hi there Dec 23 17:58:25 please help me... Dec 23 17:58:32 i have a problem Dec 23 17:58:50 i need ubuntu arm to have GUI Dec 23 17:58:57 what do i do ? Dec 23 18:13:05 pnphi: What platform? Can you use one of our already generated images, like ubuntu-11.10-preinstalled-desktop for omap, omap4, mx5, or ac100? Dec 23 18:14:48 https://wiki.ubuntu.com/ARM/BuildArmPackages Dec 23 18:15:08 i have a ARM Ubuntu on Qemu Dec 23 18:15:28 but this isn't GUI Dec 23 18:17:13 i want to have GUI ...how i do ? Dec 23 18:17:36 Well, if you can get it to a shell and run apt-get, try installing task-selector "apt-get install tasksel". Then run it and select one of the ubuntu desktops (ubuntu-desktop, kubuntu, xubuntu, etc). Dec 23 18:17:54 It will pull all the required packages and install them. Dec 23 18:18:36 No guarantees that they all work under QEMU though. I don't test that. Dec 23 18:19:12 ok thanks..i try it Dec 23 18:22:56 i wish you merry christmas Dec 23 18:32:48 Happy holidays. Dec 23 21:39:36 hey all - anyone know proper bootargs to get built-in displays on oneiric on blaze? Dec 24 00:50:29 or a serial console for that matter? **** ENDING LOGGING AT Sat Dec 24 02:59:57 2011