**** BEGIN LOGGING AT Sat May 19 02:59:59 2012 May 19 08:32:36 Hi! I have a horrible experience with 12.04 armhf on my pandaboard.. I was untarring a file, got a segfault, it slowed down a lot. managed to open uxterm, execute "dmesg", now it seems unable to spawn processes (my guess), I can toy with X11 though... May 19 08:34:56 Anything I can try to find out, before I pull the plug? (ssh logs in, but shell does not spawn. X11 windows don't close) May 19 08:57:12 nevermind.. turning on the screen again is among the stuff that's stuck May 19 11:04:59 Another question - has anyone working sound output with 12.04 armhf on pandaboard? (since I don't and I have no clue how to debug) May 19 18:00:52 What about pandaboard's ethernet randomly getting stuck? any cure to that? May 19 18:19:19 ujee: tried ifdown eth0 ; ifup eth0 ? May 19 18:19:48 helps for a while May 19 18:20:19 tried a different port on the switch/hub it is connected to? it might be a bad port on the switch/hub its self May 19 18:20:41 doubt that.. got a brand new May 19 18:20:49 but sure, I can try May 19 18:21:17 how often does the problem occurr? May 19 18:22:05 when idle, then never, when streaming a tv channel, roughly once per hour? May 19 18:23:00 are you up to date on the kernel of the distribution you're using? May 19 18:23:10 armhf... May 19 18:24:35 afk... May 19 18:24:38 what OS/distribution are you using on that board? :P May 19 18:28:40 ubuntu of course , 12.04 armhf, TypoNAM May 19 18:30:29 and you have checked for updates, right? May 19 18:32:17 y May 19 18:32:37 newest omap4 kernel May 19 18:33:26 but i had that issue in 11.11 and 12.04 armel too.. May 19 18:33:38 hmmm :/ May 19 18:33:53 do you think my panda is defective or something May 19 18:35:14 (fully back to keyboard) May 19 19:02:49 it hasn't died yet (after switching the switch port.. but it's really weird that it would be the issue.. the cable might be bad, though) May 19 21:29:15 y helo thar! anyone wanna help me find a good driver for the PowerVR SGX 540 running pandaboard on ubuntu 11.10? May 19 21:29:50 booting from SD-Card, rootfs on USB->SSD Disk, I have ubuntu-omap4-extras installed, es2_info seems to be working, glxinfo as well (even though it says its software rasterizing, wich is my problem) May 19 21:43:14 OpenGL ES is not OpenGL, glxinfo is OpenGL only, es2_info is OpenGL ES only May 19 21:43:29 PowerVR SGX only does OpenGL ES hardware acceleration May 19 21:45:57 So that could be the reason xbmc is like 0.4 fps for me ? May 19 21:46:10 es2_info recognizes the right renderer though May 19 21:46:39 does xbmc use OpenGL? May 19 21:48:10 TypoNAM: I think so, dont know if its compatible with ES but i compiled it myself so if it is its probably a configuratiionissue May 19 21:49:09 I know xbmc should have no problems getting a decent framerate on pandaboard es though May 19 21:49:11 it might be, I'm not sure what all is available for video drawing acceleration for pandaboard May 19 21:52:19 Haikarainen: you'll want to build it with --enable-opengles (or --enable-gles not sure) and --enable-neon May 19 21:53:00 Haikarainen: my xbmc here runs perfectly smoothly in 1080p, it just gets a bit slow when decoding some 720p videos (and is almost unusable on 1080p content) May 19 21:53:59 IIRC you have a pre-built version of xbmc with GLES support in the linaro overlay PPA (be sure to just pick these packages and not the whole overlay, unless you want the rest of all the linaro backports) **** ENDING LOGGING AT Sun May 20 02:59:58 2012