**** BEGIN LOGGING AT Fri Jun 01 02:59:58 2012 Jun 01 03:20:42 hey, I have a bug report on the -PSP kernel from rcn-ee's minimal builds, is that your kernel? Where should I send it? Problem relates to plugging in a rtl8192cus Jun 01 03:59:06 trelane, the rtl8192's are 50/50 if they'll work at this point.. i have one that works perfect, and the other that failes on every boot.. Jun 01 03:59:40 ok, would dmesg output from insertion/failure be of help? Jun 01 04:00:12 not really... have you tried 3.2-psp13? there's a couple musb fixes... Jun 01 04:00:43 I'll update now and report shortly Jun 01 04:04:19 * heathkid waiting on an update... Jun 01 04:28:39 rcn-ee, I used a clean 12.04-r1, and don't see the kernel in apt-get dist-upgrade Jun 01 04:54:12 trelane, i don't have a repo setup for the kernel deb's.. it's mostly manual installling deb's... 3.2-psp13 for precise-armhf is still begin built.. but i have a cross built uImage/modules posted here for another user: /msg MemoServ READ NEW Jun 01 04:54:20 http://rcn-ee.homeip.net:81/testing/beaglebone/3.2-psp13/ Jun 01 04:55:38 as long as my smoke test is sucessful tomorrow, that' actually the default kernel going to be used in my monthly update demo images, this weekend.. Jun 01 04:57:49 rcn-ee, sounds good Jun 01 19:17:17 Hi, is anyone here familiar with Ubuntu arm on Android handset, native not chroot? Jun 01 19:18:52 Xase, if its native, its not android Jun 01 19:19:12 also, chroots are native Jun 01 19:19:20 No kidding? I want to remove android. Jun 01 19:19:26 -_- Jun 01 19:19:57 I meant direct. Not side by side. Jun 01 19:20:44 It's still an android handset. Well at least till I remove Android. Jun 01 20:06:44 Hey prpplague Jun 01 20:06:56 orated_: greetings Jun 01 20:49:45 prpplague: I'm trying to get ethernet working on BB B4 running Ubuntu 11.10 kernel 3.2. I asked in #beagle about the same and got directed here. Could you help me on that? Jun 01 20:50:46 orated_: sorry i can not, i am sure someone here who normally does ubuntu stuff can possible help you Jun 01 20:51:20 Sure, I'll try Jun 01 20:53:17 Hello! I'm running Ubuntu 11.10 kernel 3.2 on BeagleBaord B4. Both the BeagleBoard and USB hub are externally powered with 5V supply. lsusb, ifconfig outputs as shown here - http://paste.ubuntu.com/1018497/ - How can I get ethernet working? Jun 01 20:53:30 I've a usb hub connected to the OTG port. A usb-ethernet adapter is connected to the hub. And a RJ45 cable from one of the four ports of the router is connected to it. Second port of the same router is connected to the host system Jun 01 21:06:20 sudo if up usb0 ? Jun 01 21:06:28 Hub off the OTG port? Why not try the single USB port? I'm not sure if the OTG port is enabled in the main kernel. Jun 01 21:06:36 sudo dhcpd? Jun 01 21:07:33 * GrueMaster didn't look at the pastebin output first. Jun 01 21:08:06 :P Jun 01 21:08:52 Hello GrueMaster. Probably dont remember me, but hello nonetheless. Jun 01 21:09:11 Been a while. How's it going? Jun 01 21:11:43 Good. Still twiddling with my nook. id put serious effort into it but my computer is beyond junky Jun 01 21:16:01 Xase: GrueMasterJust a moment, BB is not accepting commands, restarting Jun 01 21:23:46 Xase: sudo ifup usb0 gives - Ignoring unknown interface usb0=usb0. Jun 01 21:24:15 And sudo dhcpd, command not found Jun 01 21:24:43 GrueMaster: There is no USB port on Beagleboard B4, only USB OTG Jun 01 21:26:31 hrm my linux knowledge is short when it comees to networking :( Jun 01 21:27:11 Same here Jun 01 21:34:30 that sucks orated_, I've used a beagleboard rev C and had USB ethernet networking with one of linksys's adapters with vanilla kernel. I used the working populated USB port and a powered USB hub to connect the keyboard, mouse, and ethernet adapter to :P Jun 01 21:34:48 so I'm not sure if the OTG port will work the same way Jun 01 21:42:09 Probably its hardware defect. Or some kernel patch missing. - http://elinux.org/BeagleBoard#USB https://groups.google.com/forum/?fromgroups#!topic/beagleboard/KtUXwhWm2r4 Jun 01 21:45:22 orated_: I am not that familiar with the rev B board (I have a C4). As I said earlier, I am not sure if the OTG port is enabled in the kernel. Jun 01 21:46:14 Thanks, I'll find about that Jun 01 22:24:40 I require network connection only for installing xfce and OpenCV related packages. Is it possible to chroot to the fs from the host to achieve the same? So that I can atleast start with the main task instead of getting stuck ... **** ENDING LOGGING AT Sat Jun 02 02:59:58 2012