**** BEGIN LOGGING AT Fri Aug 19 02:59:57 2011
Aug 19 10:18:46 <Noor> hi all
Aug 19 10:19:00 <Noor> how can i confirm that my patch is not breaking anything
Aug 19 10:19:12 <Noor> i use make target to build the stuff
Aug 19 10:19:31 <Noor> and the package whom I sent a patch is building fine
Aug 19 10:19:45 <Noor> how can I make sure that nothing else is broken
Aug 19 10:29:23 <ant_work> send patch for review
Aug 19 10:37:06 <Noor> ant_work: I am doinig that .... I thought that there are some extra stuff that I can do before sending the patch
Aug 19 10:37:24 <Noor> ant_work: but thanks for the suggestion
Aug 19 10:39:05 <ant_work> there are too many variables..an innocent patch can break some other arch when touching core files
Aug 19 10:40:05 <ant_work> if the scope is limited to a generic recipe, usually no probs
Aug 19 10:41:16 <Noor> ant_work: yeah
Aug 19 16:02:17 <nitink> kumar ping
Aug 19 17:46:02 <Arial700> NOTE: Runtime target 'ttf-dejavu-sans' is unbuildable, removing...
Aug 19 17:46:02 <Arial700> Missing or unbuildable dependency chain was: ['ttf-dejavu-sans']
Aug 19 17:46:02 <Arial700> NOTE: Runtime target 'x11vnc' is unbuildable, removing...
Aug 19 17:46:02 <Arial700> Missing or unbuildable dependency chain was: ['x11vnc', 'avahi', 'gtk+', 'ttf-dejavu-sans'] ... (so many) NOTE: Preparing runqueue
Aug 19 17:46:02 <Arial700> ERROR: All buildable tasks have been run but the build is incomplete (--continue mode). Errors for the tasks that failed will have been printed above.
Aug 19 17:46:52 <Arial700> Plz help me out ..  I'm getting this when using "$ bitbake -k poky-image-sato"
Aug 19 18:16:49 <Arial700> Got that.... Did some miss configuration in poky.conf file and local.conf  -- ThankU
Aug 19 19:35:08 <otavio_> zeddii: Ola
Aug 19 19:35:10 <otavio_> :-)
Aug 19 19:44:36 <nitink1> Arial700: did you resolve bitbake build issue ?
Aug 19 19:46:18 <Arial700> nitink1, yes... That one is resolved! But I'm now I 've "Some testcases fail, pls. check test result and test log!!!"
Aug 19 19:46:49 <Arial700> nitink1, Test_Info: There is no Qemu process
Aug 19 19:46:49 <Arial700> | 	Test_Info: Wait for qemu up...
Aug 19 19:46:49 <Arial700> | 	Test_Info: There is no Qemu process
Aug 19 19:46:49 <Arial700> | 	Test_Info: Wait for qemu up...
Aug 19 19:46:49 <Arial700> | 	Test_Info: There is no qemu process or qemu ip address found, return failed
Aug 19 19:47:04 <Arial700> This is shown for evry test case.. !! Have any ideas!
Aug 19 19:47:14 <nitink1> Arial700: that should not happen
Aug 19 19:47:22 <nitink1> what commands are you running ?
Aug 19 19:49:06 <Arial700> "$ bitbake -k poky-image-sato" --> After it has done evrything these test case failures it is showing with SSH, scp, dmesg etc..
Aug 19 19:49:51 <nitink1> and how are you running testcases ?
Aug 19 19:50:10 <Arial700> though I 've got the image in poky-bernard-5.0.1/build/tmp/deploy/images
Aug 19 19:50:31 <nitink1> DId you fire up qemu
Aug 19 19:50:56 <Arial700> nitink1, I am not running those test cases... bitbake itself has run that..
Aug 19 19:51:06 <Arial700> No, I didnt fire up qemu
Aug 19 19:51:21 <Arial700> I just ran the bitbake ....
Aug 19 19:51:35 <Arial700> Do I need to run  qemu before running bitbake ??
Aug 19 19:51:36 <nitink1> so you are saying these testcases are run as part of "bitbake -k poky-image-sato" command ?
Aug 19 19:52:05 <nitink1> nope bitbake building should not depend qemu running
Aug 19 19:52:18 <Arial700> nitink1, absolutely!
Aug 19 19:52:53 <nitink1> Arial700: I never met such kind of issue. so what is all you have done so far ?
Aug 19 19:53:06 <Arial700> I dont know if it depends b'se I 've not studied the complete documentation but just gone through the quick start and trying it!
Aug 19 19:53:28 <nitink1> so are you building for the 1st time ?
Aug 19 19:53:48 <Arial700> for the second time...
Aug 19 19:53:53 <nitink1> I see, what steps are you following ?
Aug 19 19:54:33 <nitink1> what have you done so far
Aug 19 19:54:51 <Arial700> For the first time I didnt get any errors like these... and also i did nt get sato GUI. So I 'm trying for the second time
Aug 19 19:55:27 <Arial700> I just followed the quick start documentation but changed the local.conf file
Aug 19 19:55:46 <Arial700> and also the poky.conf file for changing the name and version of distro
Aug 19 19:56:04 <Arial700> then I ran bitbake.
Aug 19 19:56:51 <Arial700> Yes.. I  forgot to mention.. I 've included machine as ARM and beagleboard for test envirnment
Aug 19 19:57:49 <Arial700> The error list also has this NOTE: package poky-image-sato-1.0-r0: task do_qemuimagetest: Failed
Aug 19 19:57:49 <Arial700> ERROR: Task 11 (/home/chinmaya/yocto/poky-bernard-5.0.1/meta/recipes-sato/images/poky-image-sato.bb, do_qemuimagetest) failed with exit code '1'
Aug 19 19:57:49 <Arial700> ERROR: '/home/chinmaya/yocto/poky-bernard-5.0.1/meta/recipes-sato/images/poky-image-sato.bb' failed
Aug 19 19:59:17 <Arial700> Now I ran this "$poky-qemu qemuarm"
Aug 19 20:00:18 <Arial700> the image created booted in qemu but no GUI ! forced to enter into terminal (alt + f1)
Aug 19 20:13:54 <Arial700> 've to leave now, any suggestions plz mail me --> inblueswithu@yahoo.co.in
Aug 19 21:00:43 <msm> is there a way to disable ccache?
Aug 19 21:02:34 <Crofton> msm, there are ways
Aug 19 21:02:51 <Crofton> I think I rename the binary or something like that last time I needed to
Aug 19 21:04:11 <Crofton> gm
Aug 19 21:08:13 <msm> ill play around
Aug 19 21:16:47 <dvhart> jefferai, ping
Aug 19 21:18:48 <RP__> msm: CCACHE = "" in local.conf should do it
Aug 19 21:19:49 <msm> RP__:  thanks
Aug 19 21:30:43 <Crofton> I always had trouble when I did that :(
Aug 19 21:30:57 <Crofton> I never understood why though
Aug 19 22:13:44 <msm> does nothing in yocto use pkg-config?
Aug 19 22:14:19 <msm> nvm, its pkgconfig
Aug 19 22:36:25 <RP__> Crofton: what kind of trouble?
Aug 19 22:49:53 <Crofton> I forgot, but I couldn't make ccache go away with the env var for some reason
Aug 19 22:49:59 <Crofton> this was a couple of year s back
**** ENDING LOGGING AT Sat Aug 20 02:59:56 2011