**** BEGIN LOGGING AT Mon Jun 22 02:59:59 2015
Jun 22 06:38:44 <parrot> I tried a new mainline kernel and while the build process went fine, I got error ERROR: Nothing RPROVIDES 'i915' when I tried to build my final image...so I'm not sure what went wrong in the process
Jun 22 07:16:15 <mckoan> good morning
Jun 22 07:16:17 <mckoan> good morning
Jun 22 07:16:48 <_4urele_> good morning
Jun 22 07:17:19 <_4urele_> did someone already tried to build openjdk with wayland?
Jun 22 07:19:43 <parrot> I tried a new mainline kernel and while the build process went fine, I got error ERROR: Nothing RPROVIDES 'i915' when I tried to build my final image...so I'm not sure what went wrong in the process
Jun 22 08:08:16 <lpapp> good morning
Jun 22 08:11:18 <cristianiorga> hello all
Jun 22 08:12:51 <parrot> hello all
Jun 22 08:13:24 <parrot> I tried a new mainline kernel and while the build process went fine, I got error ERROR: Nothing RPROVIDES 'i915' when I tried to build my final image...so I'm not sure what went wrong in the process
Jun 22 08:32:17 <Aurelien_> hi all
Jun 22 08:33:05 <Aurelien_> I need some help buildind maliit
Jun 22 08:33:57 <Aurelien_> there is a layer wich is deprecated, and when removing the line got an error : cannot access *.pro: No such file or directory
Jun 22 08:34:04 <Aurelien_> but S variable is correctly st
Jun 22 08:34:10 <Aurelien_> set*
Jun 22 08:36:13 <Aurelien_> also, when I try to buils from source with QtCreator, I get : dbus-binding-tool: Command not found
Jun 22 08:37:15 <Aurelien_> but this one is located at /usr/local/oecore-x86_64/sysroots/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/usr/bin/dbus-binding-tool (and environment variables are set)
Jun 22 08:37:23 <Aurelien_> can someone help me ? thanks
Jun 22 08:42:06 <lpapp> I suggest that you build the project successfully without Yocto first.
Jun 22 08:42:20 <lpapp> and once that is done, paste a bit more error.
Jun 22 08:46:26 <Aurelien_> if I specifically add folder containing dbus-binding-tool in PATH and then compile again, I get dbus-binding-tool: Syntax error: word unexpected (expecting ")")
Jun 22 12:39:45 <cdrix> hi guys
Jun 22 16:33:52 <xulfer> Hi
Jun 22 17:54:11 <realBigfoot> i wanted to run a python3 script on a do_configure_append(), but it always uses python2
Jun 22 17:54:24 <realBigfoot> is there a var like ${PYTHON} to do it ?
Jun 22 18:12:24 * kergoth works on his prototype recipetool appendsrcfile
Jun 22 19:05:19 <ftonello> realBigfoot: I believe bitbake only supports python2
Jun 22 19:06:48 <kergoth> not relevent. bitbake uses python2, that doesnt' mean you can't build python3 or python3-native
Jun 22 19:15:53 <realBigfoot> ftonello, kergoth i got figured out i had to inherit python3native
Jun 22 19:16:06 <kergoth> ah, yeah, makes sense, that'll add its bindir to the PATH
Jun 22 19:50:19 <zloy> hey guys
Jun 22 19:51:14 <redengin> hey
Jun 22 19:53:26 <zloy> could somebody help me with this one: http://ix.io/jfw ?
Jun 22 20:02:50 <realBigfoot> zloy, i have never seen this error however, it looks like he failed on do_patch phase of linux-yocto-custom
Jun 22 20:03:02 <realBigfoot> you have to take a look at the patches to see what the problem is
Jun 22 20:05:46 <zloy> realBigfoot: actually, I think the problem in this line(s): ls: cannot access .meta*: No such file or directory
Jun 22 20:05:56 <zloy> find: '.meta/cfg/scratch': No such file or directory
Jun 22 20:10:25 <redengin> zloy, try this (https://software.intel.com/en-us/forums/topic/277648):  sudo dpkg-reconfigure dash
Jun 22 20:14:00 <zloy> redengin: actually I am using Exherbo with bash shell :)
Jun 22 20:17:54 <redengin> hmm, can you make the /bin/sh -> dash?
Jun 22 20:18:49 <redengin> perhaps just installing dash will do it?  http://git.exherbo.org/summer/packages/app-shells/dash/index.html
Jun 22 20:19:13 <kergoth> current yocto doesn't require that /bin/sh be bash
Jun 22 20:19:30 <kergoth> hasn't been required for quite a long time, actually
Jun 22 20:20:27 <redengin> kergoth, yes, but the link made it sound like there might be a dependency on dash
Jun 22 20:21:01 <kergoth> that link is from 2012.
Jun 22 20:21:13 <kergoth> and it would have been a dependency on bash, not dash
Jun 22 20:21:22 <kergoth> you reconfigure dash to tell it not to use dash as /bin/sh and use bash instead
Jun 22 20:21:25 <kergoth> but again, that's not needed anymore
Jun 22 20:22:45 <zloy> hm
Jun 22 20:23:16 <redengin> kergoth, ah, my mistake I figured reconfigure would reset the link to dash
Jun 22 20:23:51 <kergoth> reconfigure pops up an ncurses interface to let you decide which you want as /bin/sh
Jun 22 20:23:58 <kergoth> (or whatever other debconf mechanisms you have available)
Jun 22 20:52:58 <blackfi_sh> Hey, I am planning to buy an Nvidia Jetson TK1, and plan to do intensive Image-processing on it. It comes out of the box with Ubuntu + Unity and all those shit. Moreover, I've used yocto on a old pandaboard before and I love it. But nevertheless, I am not a yocto expert.  For this nvidia board, there is no official yocto bsp. But I found one on GitHub. Can anyone plase take a look at it, and see if it is full featured, and a good 
Jun 22 20:53:13 <blackfi_sh> This is the BSP: https://github.com/cubicool/meta-jetson-tk1
Jun 22 20:54:18 <blackfi_sh> The main thing is that I need CUDA support. Can anyone help me with this? I need to finalise the purchase tomorrow itself.
Jun 22 21:09:54 <rburton> blackfi_sh: that bsp ships the binary drivers, including libcuda
Jun 22 21:11:14 <blackfi_sh> @rburton, thanks for responding. Do you see anything that it lacks?
Jun 22 21:12:04 <blackfi_sh> rburton, I am just asking it here because I am not an expert at it
Jun 22 21:12:56 <rburton> its got a custom kernel and the binary drivers, that's probably all you need
Jun 22 21:15:47 <blackfi_sh> rburton, So it's green light, and I can go ahead with the purchase?
Jun 22 21:16:05 <Crofton|work> blackfi_sh, you are not alone in your quest
Jun 22 21:16:29 <Crofton|work> I ahve a freind working on a build also
Jun 22 21:16:33 <Crofton|work> similar reasons
Jun 22 21:16:41 <Crofton|work> I'm tryin gt help him as I can
Jun 22 21:17:02 <blackfi_sh> Crofton|work, can I contact him? I've never talked with someone who owned the board
Jun 22 21:17:28 <blackfi_sh> Where exactly is he stuck?
Jun 22 21:18:15 <Crofton|work> last report (a an hour or so agao) was he had a build but needed to test
Jun 22 21:19:26 <blackfi_sh> is he on freenode? How was his experience with the OS that came with the box?
Jun 22 21:20:04 <Crofton|work> dunno
Jun 22 21:20:16 <Crofton|work> I told him you are asking in here, but look slike he is afk
Jun 22 21:20:23 <blackfi_sh> he on freenode?
Jun 22 21:20:40 <blackfi_sh> i see
Jun 22 21:20:49 <Crofton|work> I'm sure oe can make images for it that work :)
Jun 22 21:21:16 <blackfi_sh> He using he same bsp?
Jun 22 21:21:35 <Crofton|work> I think he is using kraj's which has some more work I think
Jun 22 21:21:42 <Crofton|work> search github
Jun 22 21:21:50 <blackfi_sh> ok
Jun 22 21:22:35 <blackfi_sh> I am kindof a noob when it comes to crosscom[iling, eventhough I've build youcto builds before.
Jun 22 21:22:57 <blackfi_sh> is making an ISP a complex task?
Jun 22 21:27:12 <Crofton|work> BSP, depends on what you are good at
Jun 22 21:27:23 <Crofton|work> I suspect we can make the ones on github work
Jun 22 21:29:03 <blackfi_sh> so then how do they perform against the os provided by the board makers(Nvidia in my case)?
Jun 22 21:29:53 <blackfi_sh> perform in comparison to*
Jun 22 21:31:27 <staylor_> blackfi_sh: do you plan on having a display always connected and running X11?  At least their GL drivers required a running X11 session not sure on CUDA.
Jun 22 21:32:21 <blackfi_sh> I wont be having a display at all. No X11
Jun 22 21:34:28 <blackfi_sh> X11 session means what? won't an X11 server running be enough?
Jun 22 21:36:15 <staylor_> blackfi_sh: yes but I've had issues with some boards not being able to run X11 if a display wasn't probed and NVidia does not provide RAW framebuffer drivers for GL afaik.
Jun 22 21:37:34 <blackfi_sh> Can I fake a display by soldering a resistor or something? I've heard of that before. Never know if it works.
Jun 22 21:39:46 <staylor_> it's probed through i2c so no, but you should be able to modify the u-boot scripts.  I had this issue on a nitrogen6x board where if hdmi wasn't probed on i2c in the bootloader they'd remove hdmi from the dts (why oh why!?).
Jun 22 21:40:31 <blackfi_sh> staylor_, wht are the consiquences of whatever you are saying? in layman words?
Jun 22 21:41:33 <staylor_> blackfi_sh: you might need to do some fiddling around to get CUDA/GL working without an HDMI plugged in.  More of a heads up than anything ;-)
Jun 22 21:42:42 <blackfi_sh> How difficult would that be/
Jun 22 21:44:05 <blackfi_sh> also it just came to my mind, I don't know if it's feasible, but can I send the I2C acknowledgment and fake a monitor by using a microcontroller?
Jun 22 22:04:00 <blackfi-sh> sorry I had a connection loss, will see the logs to find if i missed anything
Jun 22 22:06:44 <blackfi-sh> Crofton|work will your friend be back anytime sooon? should I wait?
Jun 22 22:10:10 <Crofton|work> I do no thinnk so, I'll let him know you are interested,
Jun 22 22:11:30 <blackfi-sh> yes please, It's almost the morning ow, have to get some sleep. I will be back.
Jun 22 22:28:23 <rburton> hm, is there a magic way to get all multilib-variants of library packages into an image?
Jun 22 23:05:28 <zwerch> Hello guys. How can I get a list of all the licenses (best case: all the paths of all the license files) of the software baked into my image?
Jun 22 23:05:28 <zwerch> I already found build/tmp/deploy/licenses/$imagename-$machine-$date/license.manifest, but this is not really what I am looking for.
**** ENDING LOGGING AT Tue Jun 23 02:59:58 2015